Edge trims, outlets and drainage across Buckinghamshire

Guide price

£130–£390

Repair price

Confirmed once the leak or damage is found

Condition survey report

£170–£330

Coverage

England, Wales, Scotland, NI

How much does a new roof edge or outlet cost in Buckinghamshire?

Guide prices including VAT at South East rates. We confirm the price once we've traced the leak or seen the damage.

Which flat roofs are common in Buckinghamshire?

Flat roofs in Buckinghamshire sit on bungalows with flat-roofed side extensions and dormers, 1930s semis with flat-roofed garages and kitchen extensions and lock-up garage blocks on estates. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Buckinghamshire the application goes to Milton Keynes City Council and Buckinghamshire Council. More on the rules.

How long do flat roof trims and outlets last?

Properly fixed GRP or aluminium trims and well-installed outlets should last about as long as the waterproofing they are part of. What shortens their life is poor fixing, movement in a rotten deck edge and blockages that are never cleared.

A quick check of outlets and gutters each autumn, and again after storms, prevents most drainage problems. Look for leaves and silt in outlets, gutters pulling away from the fascia, trims that have lifted or split at joints and staining on the wall below the edge. The maintenance guide lists what to check and when. Only check what you can see safely from the ground, a window or a ladder at the edge, and never walk on a roof that isn't designed for it.

Do flat roofs need overflows?

Roofs that drain to internal outlets or behind parapets should normally have an overflow, so that if an outlet blocks, water spills somewhere visible instead of rising over the upstands and into the building.

An overflow is usually a spout or weir set through the parapet or kerb at a level below the top of the upstands. When water runs from it, that is a sign the main outlet is blocked or overloaded. On a simple roof that drains over a drip trim into an external gutter, the open edge itself does the same job.

We look at where the water goes in heavy rain, how many outlets the roof has for its size, and whether the outlets, hoppers and downpipes are clear and properly connected. Leaf guards on outlets help on roofs near trees, as long as they are cleared regularly.

Which towns in Buckinghamshire do we cover?

• Milton Keynes
• High Wycombe
• Aylesbury
• Bletchley
• Amersham
• Chesham
• Gerrards Cross
• Chalfont Saint Peter
• Marlow
• Newport Pagnell

Everything about edge trims, outlets and drainage → · All flat roofing in Buckinghamshire →