Rooflights in flat roofs across Hampshire

Guide price

£3,300–£5,750

Survey

Free for new and replacement roofs

Quote

Fixed, in writing

Coverage

England, Wales, Scotland, NI

How much does a rooflight upstand cost in Hampshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Hampshire?

Flat roofs in Hampshire sit on newer estates where the first extension roofs are now being replaced, bungalows with flat-roofed side extensions and dormers and low-rise post-war blocks of flats. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Hampshire the application goes to Southampton City Council, Portsmouth City Council, Basingstoke and Deane Borough Council and 10 other councils. More on the rules.

Should I choose a fixed or an opening rooflight, or a lantern?

Choose a fixed rooflight if you only want daylight, an opening one if the room needs ventilation, and a lantern if you want a raised, pitched glazed feature over a larger space.

• Fixed flat rooflights are the simplest and usually the cheapest option. They have the fewest moving seals, and the upstand detail is straightforward.
• Opening rooflights can be manual or electric, and electric units often include a rain sensor that closes them automatically. They need a power supply planned in before the ceiling is finished. Some are designed as hatches to give access to the roof.
• Roof lanterns have a framed, pitched glazed top that brings in more light and adds height to the room. They are heavier and larger, so the upstand has to be strong, level and square, and the joists around the opening may need strengthening.

Whatever you choose, it helps to settle on the unit before the roof is built, so the upstand can be made to the maker's sizes. If you've already chosen one, we build the upstand to suit it.

Do rooflights in flat roofs need building regulations approval?

Usually, yes, for a new opening, because cutting through the roof and trimming joists is a structural alteration. Approval may also be needed because the roof itself is being re-covered.

New rooflights need to meet the energy efficiency standards for glazing, so that the unit doesn't become a weak point in an insulated roof. Many rooflights have a laminated inner pane, so that if the glass breaks it stays in place rather than falling into the room, which is worth asking for over kitchens, living spaces and stairs. Close to a boundary, the fire performance of the roof, including any rooflights, can matter under the fire safety rules.

Whether you need planning permission depends on the property and the unit. A raised lantern changes the roofline more than a flat rooflight, and listed buildings and conservation areas have stricter rules, which also differ between the four nations. We handle building control or building standards where it is needed. The building regulations page and the planning guide explain more.

Which towns in Hampshire do we cover?

• Southampton
• Portsmouth
• Basingstoke
• Gosport
• Waterlooville
• Farnborough
• Eastleigh
• Winchester
• Havant
• Andover
• Fareham
• Aldershot
• Fleet
• Totton
• New Milton
• Bordon
• Hythe
• Yateley
• Alton
• Emsworth
• Hedge End
• Romsey
• Hayling Island
• Tadley

Everything about rooflights in flat roofs → · All flat roofing in Hampshire →