- Guide price
- £2,750–£4,800
- Survey
- Free for new and replacement roofs
- Quote
- Fixed, in writing
- Coverage
- England, Wales, Scotland, NI
Wrexham at a glance
- Largest towns
- Wrexham, Rhosllannerchrugog, Brymbo
- Postcode areas
- LL
- Building control
- Wrexham County Borough Council
- Neighbouring areas
- Flintshire · Denbighshire · Conwy · Gwynedd
- Guide price region
- Wales (−8% on West Midlands rates)
How much does a rooflight upstand cost in Wrexham?
Guide prices including VAT at Wales rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, insulation + 1 rooflight upstand | £2,750–£4,800 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,500 |
| Extension (20 m²), EPDM with sedum green roof | £4,050–£7,450 |
Which flat roofs are common in Wrexham?
Flat roofs in Wrexham sit on shops with flat-roofed rear stores below flats, bungalows with flat-roofed side extensions and dormers and 1930s semis with flat-roofed garages and kitchen extensions. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in Wales
Welsh guidance is that most re-roofing needs building control approval, so it's worth checking whenever more than a quarter of a roof is replaced or repaired. Renovated roofs are upgraded to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K under the Welsh Approved Document L. In Wrexham the application goes to Wrexham County Borough Council. More on the rules.
Do rooflights in flat roofs need building regulations approval?
Usually, yes, for a new opening, because cutting through the roof and trimming joists is a structural alteration. Approval may also be needed because the roof itself is being re-covered.
New rooflights need to meet the energy efficiency standards for glazing, so that the unit doesn't become a weak point in an insulated roof. Many rooflights have a laminated inner pane, so that if the glass breaks it stays in place rather than falling into the room, which is worth asking for over kitchens, living spaces and stairs. Close to a boundary, the fire performance of the roof, including any rooflights, can matter under the fire safety rules.
Whether you need planning permission depends on the property and the unit. A raised lantern changes the roofline more than a flat rooflight, and listed buildings and conservation areas have stricter rules, which also differ between the four nations. We handle building control or building standards where it is needed. The building regulations page and the planning guide explain more.
Should I choose a fixed or an opening rooflight, or a lantern?
Choose a fixed rooflight if you only want daylight, an opening one if the room needs ventilation, and a lantern if you want a raised, pitched glazed feature over a larger space.
- Fixed flat rooflights are the simplest and usually the cheapest option. They have the fewest moving seals, and the upstand detail is straightforward.
- Opening rooflights can be manual or electric, and electric units often include a rain sensor that closes them automatically. They need a power supply planned in before the ceiling is finished. Some are designed as hatches to give access to the roof.
- Roof lanterns have a framed, pitched glazed top that brings in more light and adds height to the room. They are heavier and larger, so the upstand has to be strong, level and square, and the joists around the opening may need strengthening.
Whatever you choose, it helps to settle on the unit before the roof is built, so the upstand can be made to the maker's sizes. If you've already chosen one, we build the upstand to suit it.
Which towns in Wrexham do we cover?
Rooflights in flat roofs in Wrexham: questions
Which towns in Wrexham do you cover?
All of Wrexham. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a rooflight upstand cost in Wrexham?
£2,750–£4,800 for a 20 m² insulated EPDM extension roof with one rooflight upstand, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which postcode areas do you cover in Wrexham?
All of Wrexham, including the LL postcode areas. Send your full postcode and we'll confirm.
Why does my rooflight drip in winter?
If it only drips in cold weather and not when it rains, it is probably condensation on a cold, poorly insulated upstand or older glazing. Better ventilation helps, and an insulated kerb and modern unit usually fix it.
Do you supply rooflights and lanterns?
We fit rooflights and lanterns as part of a flat roof job, but we don't sell them as a separate product. If you've chosen a unit, we'll build the upstand to suit it.
Can a lantern go on a warm roof?
Yes. The upstand is built and insulated to the full height of the warm roof build-up, so the lantern sits at the right level above the finished surface.
Everything about rooflights in flat roofs → · All flat roofing in Wrexham →