Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing across Ceredigion

Single-ply roofing in Ceredigion is specified roof by roof: mechanically fixed on most commercial decks, adhered where fixings are unsuitable, and ballasted under green roofs and terraces. Wind and rain vary across the area, so membranes, fixings and details are selected for the building in front of us rather than from a standard list.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image
Price per m²
£83–£133
Typical life
25–35+ years
Manufacturer guarantees
20–25 year guarantees on specified systems
Typical garage roof
£1,900–£3,050

Ceredigion at a glance

Largest towns
Aberystwyth
Postcode areas
SY
Building control
Ceredigion County Council
Neighbouring areas
Powys · Carmarthenshire · Neath Port Talbot · Swansea
Guide price region
Wales (−8% on West Midlands rates)

How much does a single-ply roof cost in Ceredigion?

Guide prices including VAT at Wales rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,150–£20,050
Single garage (18 m²), single-ply£1,900–£3,050
Single garage (18 m²), EPDM rubber£1,450–£2,600
Extension (20 m²), EPDM, new deck + insulation£2,600–£4,500

Which flat roofs are common in Ceredigion?

Flat roofs in Ceredigion sit on lock-up garage blocks on estates, newer estates where the first extension roofs are now being replaced and 1960s and 1970s link-detached houses with flat-roofed garages and porches. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in Wales

Welsh guidance is that most re-roofing needs building control approval, so it's worth checking whenever more than a quarter of a roof is replaced or repaired. Renovated roofs are upgraded to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K under the Welsh Approved Document L. In Ceredigion the application goes to Ceredigion County Council. More on the rules.

What insulation and approvals does a single-ply re-roof need?

On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.

Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.

How long does a single-ply roof last, and what guarantee comes with it?

A well-installed single-ply roof typically lasts 25 to 35 years or more. Its life depends mostly on the quality of the welds, the fixing pattern, protection from foot traffic and keeping outlets clear.

Signs of trouble on an older single-ply roof include seams lifting at the edges, shrinkage pulling at upstands and corners, punctures near plant, and loose fixings under the membrane on windy sites.

Manufacturer guarantees are available on many specified single-ply systems, and they often depend on a registered build-up, an inspection and sometimes an approved installer. Where the system allows, we complete that registration on your behalf. On every re-roof you also receive our written workmanship guarantee, with the length set out in the quote, and you can ask about insurance-backed options. See the guarantees guide and maintenance guide for more.

Which towns in Ceredigion do we cover?

Single-ply membrane roofing in Ceredigion: questions

Which towns in Ceredigion do you cover?

All of Ceredigion. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a single-ply roof cost in Ceredigion?

£12,150–£20,050 for a 100 m² commercial roof in single-ply with insulation, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which council handles building control for a flat roof in Ceredigion?

It depends on where the roof is: in Ceredigion that's Ceredigion County Council. Welsh guidance is that most re-roofing needs building control approval, so it's worth checking whenever more than a quarter of a roof is replaced or repaired. We confirm which applies at the survey.

Can a single-ply roof be repaired?

Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.

How long does a commercial single-ply roof take?

A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.

Can single-ply be used on a house?

Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.

Everything about single-ply membrane roofing → · All flat roofing in Ceredigion →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price