Lisburn at a glance
- Postcode districts
- BT17, BT26, BT27, BT28
- Population
- about 77,506 (GeoNames)
- Council area
- Lisburn and Castlereagh City Council
- Building approval
- Lisburn and Castlereagh City Council building control
- Nearest main town
- Belfast, about 7 miles
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
Why choose single-ply roofing in Lisburn?
Single-ply also works on an extension or garage in Lisburn if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.
Around Lisburn, flat roofs are common on newer estates where the first extension roofs are now being replaced and on terraced streets with flat-roofed rear kitchens and bathrooms. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a single-ply roof cost in Lisburn?
At Northern Ireland guide rates, a 100 m² commercial roof in single-ply with insulation comes to £11,650–£19,150 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £11,650–£19,150 |
| Single garage (18 m²), single-ply | £1,800–£2,950 |
| Single garage (18 m²), EPDM rubber | £1,400–£2,450 |
| Extension (20 m²), EPDM, new deck + insulation | £2,450–£4,300 |
What insulation and approvals does a single-ply re-roof need?
On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.
Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.
What's included?
- Edge protection on every job and walkway protection around plant
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- Vapour control layer and warm-roof or tapered insulation as specified
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
Single-ply membrane roofing in Lisburn: questions
Do you cover Lisburn?
Yes. Lisburn is part of our County Antrim coverage, including postcode districts BT17, BT26, BT27, BT28. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Lisburn?
Where the work needs approval it goes to Lisburn and Castlereagh City Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Lisburn?
£11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is single-ply roofing noisy in the rain?
No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.
Can a single-ply roof be repaired?
Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.