Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Durham

Planning a single-ply roof in Durham? Use the guide-price tool for a starting figure, then book a free survey. We measure up, check the deck, falls, rooflights and plant, and return a fixed written price. Every re-roof carries our written workmanship guarantee, with manufacturer guarantees registered where the system allows.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Durham at a glance

Postcode districts
DH1
Population
about 47,785 (GeoNames)
Council area
Durham County Council
Building approval
Durham County Council building control, or a registered building control approver
Nearest main town
Sunderland, about 12 miles
Guide price region
North East (−7% on West Midlands rates)

Why choose single-ply roofing in Durham?

On exposed sites in Durham and elsewhere, mechanically fixed single-ply is specified with a fixing pattern based on wind uplift, with extra fasteners at corners and edges. That makes it a strong option for commercial roofs where wind loads are a concern.

Around Durham, flat roofs are common on lock-up garage blocks on estates and on newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.

How much does a single-ply roof cost in Durham?

For Durham we use North East rates: £12,300–£20,250 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,300–£20,250
Single garage (18 m²), single-ply£1,900–£3,100
Single garage (18 m²), EPDM rubber£1,500–£2,600
Extension (20 m²), EPDM, new deck + insulation£2,600–£4,550

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Vapour control layer and warm-roof or tapered insulation as specified
  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • Hot-air welded seams, each probed along its full length
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Durham: questions

Do you cover Durham?

Yes. Durham is part of our County Durham coverage, including postcode districts DH1. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Durham?

Where the work needs approval it goes to Durham County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Durham?

£12,300–£20,250 for a 100 m² commercial roof in single-ply with insulation, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What is the difference between PVC and TPO roofing?

Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Other flat roof work in Durham

Single-ply membrane roofing in Durham: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price