Long Eaton at a glance
- Postcode districts
- NG10
- Population
- about 47,898 (GeoNames)
- Council area
- Erewash Borough Council
- Building approval
- Erewash Borough Council building control, or a registered building control approver
- Nearest main town
- Nottingham, about 6 miles
- Guide price region
- East Midlands (−2% on West Midlands rates)
Why choose single-ply roofing in Long Eaton?
Single-ply is a common choice for medium and large flat roofs in Long Eaton because it covers big areas quickly, is light on the structure and has a long typical life. Wide rolls mean fewer seams, and those seams are welded and probed rather than glued.
Around Long Eaton, flat roofs are common on shops with flat-roofed rear stores below flats and on terraced streets with flat-roofed rear kitchens and bathrooms. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.
How much does a single-ply roof cost in Long Eaton?
For Long Eaton we use East Midlands rates: £12,950–£21,350 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,950–£21,350 |
| Single garage (18 m²), single-ply | £2,000–£3,250 |
| Single garage (18 m²), EPDM rubber | £1,550–£2,750 |
| Extension (20 m²), EPDM, new deck + insulation | £2,750–£4,800 |
Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?
Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.
| Method | How it works | Typical use |
|---|---|---|
| Mechanically fixed | Fasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheet | Metal, timber and concrete decks on commercial roofs |
| Adhered | Membrane bonded to the insulation or deck with adhesive | Domestic roofs, roofs where fixings are unsuitable |
| Ballasted | Loose-laid and held down by paving, gravel or a green roof | Inverted roofs, terraces, green roofs |
Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.
Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.
What's included?
- Strip-out or preparation of the existing roof, with waste removed
- Hot-air welded seams, each probed along its full length
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Edge protection on every job and walkway protection around plant
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Single-ply membrane roofing in Long Eaton: questions
Do you cover Long Eaton?
Yes. Long Eaton is part of our Derbyshire coverage, including postcode districts NG10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Long Eaton?
Where the work needs approval it goes to Erewash Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Long Eaton?
£12,950–£21,350 for a 100 m² commercial roof in single-ply with insulation, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can single-ply roofing be laid over an existing roof?
Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.