Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Dorchester

We install single-ply membrane roofs in Dorchester on shops, offices, units, surgeries, clubs and blocks, as well as some domestic garages and extensions. A free survey comes first, then a fixed written quote setting out the membrane, the fixing method and the insulation. The work is carried out by vetted roofing teams working under S&K.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Dorchester at a glance

Postcode districts
DT1
Population
about 16,879 (GeoNames)
Council area
Dorset Council
Building approval
Dorset Council building control, or a registered building control approver
Nearest main town
Poole, about 20 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose single-ply roofing in Dorchester?

If a flat roof in Dorchester has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.

Dorchester's flat roofs are mostly on bungalows with flat-roofed side extensions and dormers, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does a single-ply roof cost in Dorchester?

At South West guide rates, a 100 m² commercial roof in single-ply with insulation comes to £13,650–£22,450 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,650–£22,450
Single garage (18 m²), single-ply£2,100–£3,450
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050

How long does a single-ply roof last, and what guarantee comes with it?

A well-installed single-ply roof typically lasts 25 to 35 years or more. Its life depends mostly on the quality of the welds, the fixing pattern, protection from foot traffic and keeping outlets clear.

Signs of trouble on an older single-ply roof include seams lifting at the edges, shrinkage pulling at upstands and corners, punctures near plant, and loose fixings under the membrane on windy sites.

Manufacturer guarantees are available on many specified single-ply systems, and they often depend on a registered build-up, an inspection and sometimes an approved installer. Where the system allows, we complete that registration on your behalf. On every re-roof you also receive our written workmanship guarantee, with the length set out in the quote, and you can ask about insurance-backed options. See the guarantees guide and maintenance guide for more.

What's included?

  • Hot-air welded seams, each probed along its full length
  • Edge protection on every job and walkway protection around plant
  • Vapour control layer and warm-roof or tapered insulation as specified
  • Welded details at upstands, outlets, rooflight kerbs and edge trims

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Dorchester: questions

Do you cover Dorchester?

Yes. Dorchester is part of our Dorset coverage, including postcode districts DT1. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Dorchester?

Where the work needs approval it goes to Dorset Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Dorchester?

£13,650–£22,450 for a 100 m² commercial roof in single-ply with insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Can single-ply be used on a house?

Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.

Other flat roof work in Dorchester

Single-ply membrane roofing in Dorchester: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price