Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in North Berwick

Our single-ply service in North Berwick covers full replacements, overlays of sound roofs and repairs to welded seams and details. Membranes are chosen to suit the roof: PVC where it fits the specification, TPO or FPO where compatibility with existing materials matters, and adhered or ballasted systems where fixings are unsuitable.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

North Berwick at a glance

Postcode districts
EH39
Population
about 7,840 (GeoNames)
Council area
East Lothian Council
Building approval
East Lothian Council building standards
Nearest main town
Musselburgh, about 15 miles
Guide price region
Scotland (−5% on West Midlands rates)

Why choose single-ply roofing in North Berwick?

Single-ply also works on an extension or garage in North Berwick if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.

In and around North Berwick, flat roofs are typically found on 1930s semis with flat-roofed garages and kitchen extensions, and on lock-up garage blocks on estates. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write.

How much does a single-ply roof cost in North Berwick?

Guide price in North Berwick: £12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, including VAT at Scotland rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Single garage (18 m²), single-ply£1,950–£3,150
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Vapour control layer and warm-roof or tapered insulation as specified
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Strip-out or preparation of the existing roof, with waste removed
  • Welded details at upstands, outlets, rooflight kerbs and edge trims

Building standards in Scotland

In Scotland the building standards technical handbooks (Section 6 for energy) apply, and the council's building standards service decides whether a building warrant is needed. Like-for-like repairs to a roof covering can be exempt; alterations, structural work and new roofs usually need a warrant before work starts. The domestic roof benchmark is 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in North Berwick: questions

Do you cover North Berwick?

Yes. North Berwick is part of our East Lothian coverage, including postcode districts EH39. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building standards for a flat roof in North Berwick?

Where the work needs approval it goes to East Lothian Council building standards. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in North Berwick?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Does single-ply work with solar panels or a green roof?

Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.

Can single-ply be used on a house?

Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.

Other flat roof work in North Berwick

Single-ply membrane roofing in North Berwick: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price