Beverley at a glance
- Postcode districts
- HU17
- Population
- about 30,587 (GeoNames)
- Council area
- East Riding of Yorkshire Council
- Building approval
- East Riding of Yorkshire Council building control, or a registered building control approver
- Nearest main town
- Kingston upon Hull, about 8 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
Why choose single-ply roofing in Beverley?
Single-ply often suits blocks and mixed-use buildings in Beverley because no flame is used on the roof, which can make work around residents and businesses easier to plan. Hot-air welding still needs care, but the fire risk is lower than with torch-on.
Beverley's flat roofs are mostly on bungalows with flat-roofed side extensions and dormers, with plenty on low-rise post-war blocks of flats too. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a single-ply roof cost in Beverley?
Guide price in Beverley: £12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, including VAT at Yorkshire and the Humber rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,550–£20,700 |
| Single garage (18 m²), single-ply | £1,950–£3,150 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
How long does a single-ply roof last, and what guarantee comes with it?
A well-installed single-ply roof typically lasts 25 to 35 years or more. Its life depends mostly on the quality of the welds, the fixing pattern, protection from foot traffic and keeping outlets clear.
Signs of trouble on an older single-ply roof include seams lifting at the edges, shrinkage pulling at upstands and corners, punctures near plant, and loose fixings under the membrane on windy sites.
Manufacturer guarantees are available on many specified single-ply systems, and they often depend on a registered build-up, an inspection and sometimes an approved installer. Where the system allows, we complete that registration on your behalf. On every re-roof you also receive our written workmanship guarantee, with the length set out in the quote, and you can ask about insurance-backed options. See the guarantees guide and maintenance guide for more.
What's included?
- Hot-air welded seams, each probed along its full length
- Strip-out or preparation of the existing roof, with waste removed
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Kingston upon Hull · 8 mi
- Brough · 10 mi
- Bridlington · 19 mi
- Scunthorpe · 21 mi
- Goole · 21 mi
- Grimsby · 24 mi
Single-ply membrane roofing in Beverley: questions
Do you cover Beverley?
Yes. Beverley is part of our East Riding of Yorkshire coverage, including postcode districts HU17. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Beverley?
Where the work needs approval it goes to East Riding of Yorkshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Beverley?
£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can single-ply be used on a house?
Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.
Can a single-ply roof be repaired?
Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.