Hatfield at a glance
- Postcode districts
- AL9, AL10
- Population
- about 41,265 (GeoNames)
- Council area
- Welwyn Hatfield Borough Council
- Building approval
- Welwyn Hatfield Borough Council building control, or a registered building control approver
- Nearest main town
- St Albans, about 5 miles
- Guide price region
- East of England (+5% on West Midlands rates)
Why choose single-ply roofing in Hatfield?
Single-ply also works on an extension or garage in Hatfield if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.
Hatfield's flat roofs are mostly on shops with flat-roofed rear stores below flats, with plenty on 1930s semis with flat-roofed garages and kitchen extensions too. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.
How much does a single-ply roof cost in Hatfield?
Guide price in Hatfield: £13,900–£22,850 for a 100 m² commercial roof in single-ply with insulation, including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,900–£22,850 |
| Single garage (18 m²), single-ply | £2,150–£3,500 |
| Single garage (18 m²), EPDM rubber | £1,700–£2,950 |
| Extension (20 m²), EPDM, new deck + insulation | £2,950–£5,150 |
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
What's included?
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- Vapour control layer and warm-roof or tapered insulation as specified
- Edge protection on every job and walkway protection around plant
- Strip-out or preparation of the existing roof, with waste removed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Welwyn Garden City · 3 mi
- St Albans · 5 mi
- Potters Bar · 5 mi
- Hertford · 7 mi
- Harpenden · 7 mi
- Borehamwood · 8 mi
Single-ply membrane roofing in Hatfield: questions
Do you cover Hatfield?
Yes. Hatfield is part of our Hertfordshire coverage, including postcode districts AL9, AL10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Hatfield?
Where the work needs approval it goes to Welwyn Hatfield Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Hatfield?
£13,900–£22,850 for a 100 m² commercial roof in single-ply with insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
What is the difference between PVC and TPO roofing?
Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.
Is single-ply roofing noisy in the rain?
No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.