Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Newport, Isle of Wight

We install single-ply membrane roofs in Newport, Isle of Wight on shops, offices, units, surgeries, clubs and blocks, as well as some domestic garages and extensions. A free survey comes first, then a fixed written quote setting out the membrane, the fixing method and the insulation. The work is carried out by vetted roofing teams working under S&K.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Newport, Isle of Wight at a glance

Postcode districts
PO30, PO32, PO33
Population
about 24,884 (GeoNames)
Council area
Isle of Wight Council
Building approval
Isle of Wight Council building control, or a registered building control approver
Guide price region
South East (+10% on West Midlands rates)

Why choose single-ply roofing in Newport, Isle of Wight?

If a flat roof in Newport, Isle of Wight has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.

Around Newport, Isle of Wight, flat roofs are common on newer estates where the first extension roofs are now being replaced and on terraced streets with flat-roofed rear kitchens and bathrooms. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a single-ply roof cost in Newport, Isle of Wight?

Guide price in Newport, Isle of Wight: £14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Single garage (18 m²), single-ply£2,250–£3,650
Single garage (18 m²), EPDM rubber£1,750–£3,100
Extension (20 m²), EPDM, new deck + insulation£3,100–£5,350

What insulation and approvals does a single-ply re-roof need?

On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.

Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.

What's included?

  • Vapour control layer and warm-roof or tapered insulation as specified
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Strip-out or preparation of the existing roof, with waste removed
  • Welded details at upstands, outlets, rooflight kerbs and edge trims

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Newport, Isle of Wight: questions

Do you cover Newport, Isle of Wight?

Yes. Newport, Isle of Wight is part of our Isle of Wight coverage, including postcode districts PO30, PO32, PO33. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Newport, Isle of Wight?

Where the work needs approval it goes to Isle of Wight Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Newport, Isle of Wight?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What is the difference between PVC and TPO roofing?

Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Other flat roof work in Newport, Isle of Wight

Single-ply membrane roofing in Newport, Isle of Wight: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price