Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Heysham

Our single-ply service in Heysham covers full replacements, overlays of sound roofs and repairs to welded seams and details. Membranes are chosen to suit the roof: PVC where it fits the specification, TPO or FPO where compatibility with existing materials matters, and adhered or ballasted systems where fixings are unsuitable.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Heysham at a glance

Postcode districts
LA3
Population
about 17,016 (GeoNames)
Council area
Lancaster City Council
Building approval
Lancaster City Council building control, or a registered building control approver
Nearest main town
Blackpool, about 17 miles
Guide price region
North West (−5% on West Midlands rates)

Why choose single-ply roofing in Heysham?

Single-ply also works on an extension or garage in Heysham if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.

Heysham's flat roofs are mostly on shops with flat-roofed rear stores below flats, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.

How much does a single-ply roof cost in Heysham?

Guide price in Heysham: £12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, including VAT at North West rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Single garage (18 m²), single-ply£1,950–£3,150
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

What insulation and approvals does a single-ply re-roof need?

On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.

Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.

What's included?

  • Hot-air welded seams, each probed along its full length
  • Vapour control layer and warm-roof or tapered insulation as specified
  • Strip-out or preparation of the existing roof, with waste removed
  • Edge protection on every job and walkway protection around plant

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Heysham: questions

Do you cover Heysham?

Yes. Heysham is part of our Lancashire coverage, including postcode districts LA3. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Heysham?

Where the work needs approval it goes to Lancaster City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Heysham?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

How long does a commercial single-ply roof take?

A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.

Other flat roof work in Heysham

Single-ply membrane roofing in Heysham: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price