Hammersmith and Fulham at a glance
- Postcode districts
- W6, W14, W12, SW6, SW13, W4, SW14
- Council area
- London Borough of Hammersmith and Fulham
- Building approval
- London Borough of Hammersmith and Fulham building control, or a registered building control approver
- Guide price region
- London (+20% on West Midlands rates)
Why choose single-ply roofing in Hammersmith and Fulham?
For a commercial roof in Hammersmith and Fulham with rooflights, plant and outlets, single-ply's welded details give a consistent finish. Pre-formed corners, membrane-coated trims and welded kerbs are all made in the same material as the main roof, which keeps the roof consistent and simplifies any future repairs.
In and around Hammersmith and Fulham, flat roofs are typically found on mansion blocks and purpose-built flats with large flat roofs, and on shops with flat-roofed stores below flats above. The Thames basin is one of the drier parts of Britain at roughly 730 mm of rain a year, but summer heat is the bigger test here: dark membranes on south-facing roofs swing a long way in temperature.
How much does a single-ply roof cost in Hammersmith and Fulham?
Guide price in Hammersmith and Fulham: £15,900–£26,150 for a 100 m² commercial roof in single-ply with insulation, including VAT at London rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £15,900–£26,150 |
| Single garage (18 m²), single-ply | £2,450–£4,000 |
| Single garage (18 m²), EPDM rubber | £1,900–£3,350 |
| Extension (20 m²), EPDM, new deck + insulation | £3,350–£5,850 |
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
What's included?
- Strip-out or preparation of the existing roof, with waste removed
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Hot-air welded seams, each probed along its full length
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Kensington and Chelsea · 1 mi
- Wandsworth · 3 mi
- Westminster · 3 mi
- Ealing · 4 mi
- Camden · 4 mi
- Lambeth · 5 mi
Single-ply membrane roofing in Hammersmith and Fulham: questions
Do you cover Hammersmith and Fulham?
Yes. Hammersmith and Fulham is part of our London coverage, including postcode districts W6, W14, W12, SW6, SW13, W4 and 1 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Hammersmith and Fulham?
Where the work needs approval it goes to London Borough of Hammersmith and Fulham building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Hammersmith and Fulham?
£15,900–£26,150 for a 100 m² commercial roof in single-ply with insulation, at London guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can single-ply roofing be laid over an existing roof?
Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.