Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Motherwell

Our single-ply service in Motherwell covers full replacements, overlays of sound roofs and repairs to welded seams and details. Membranes are chosen to suit the roof: PVC where it fits the specification, TPO or FPO where compatibility with existing materials matters, and adhered or ballasted systems where fixings are unsuitable.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Motherwell at a glance

Postcode districts
ML1, ML4
Population
about 32,840 (GeoNames)
Council area
North Lanarkshire Council
Building approval
North Lanarkshire Council building standards
Nearest main town
East Kilbride, about 7 miles
Guide price region
Scotland (−5% on West Midlands rates)

Why choose single-ply roofing in Motherwell?

Single-ply is a common choice for medium and large flat roofs in Motherwell because it covers big areas quickly, is light on the structure and has a long typical life. Wide rolls mean fewer seams, and those seams are welded and probed rather than glued.

In and around Motherwell, flat roofs are typically found on lock-up garage blocks on estates, and on bungalows with flat-roofed side extensions and dormers. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write.

How much does a single-ply roof cost in Motherwell?

At Scotland guide rates, a 100 m² commercial roof in single-ply with insulation comes to £12,550–£20,700 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Single garage (18 m²), single-ply£1,950–£3,150
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Hot-air welded seams, each probed along its full length
  • Edge protection on every job and walkway protection around plant
  • Strip-out or preparation of the existing roof, with waste removed
  • Welded details at upstands, outlets, rooflight kerbs and edge trims

Building standards in Scotland

In Scotland the building standards technical handbooks (Section 6 for energy) apply, and the council's building standards service decides whether a building warrant is needed. Like-for-like repairs to a roof covering can be exempt; alterations, structural work and new roofs usually need a warrant before work starts. The domestic roof benchmark is 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Motherwell: questions

Do you cover Motherwell?

Yes. Motherwell is part of our North Lanarkshire coverage, including postcode districts ML1, ML4. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building standards for a flat roof in Motherwell?

Where the work needs approval it goes to North Lanarkshire Council building standards. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Motherwell?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What is the difference between PVC and TPO roofing?

Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.

Can a single-ply roof be repaired?

Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.

Other flat roof work in Motherwell

Single-ply membrane roofing in Motherwell: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price