Corby at a glance
- Postcode districts
- NN17, NN18
- Population
- about 68,164 (GeoNames)
- Council area
- North Northamptonshire Council
- Building approval
- North Northamptonshire Council building control, or a registered building control approver
- Nearest main town
- Northampton, about 19 miles
- Guide price region
- East Midlands (−2% on West Midlands rates)
Why choose single-ply roofing in Corby?
Single-ply also works on an extension or garage in Corby if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.
In a large town like Corby, flat roofs are commonly found on lock-up garage blocks on estates or low-rise post-war blocks of flats. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.
How much does a single-ply roof cost in Corby?
At East Midlands guide rates, a 100 m² commercial roof in single-ply with insulation comes to £12,950–£21,350 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,950–£21,350 |
| Single garage (18 m²), single-ply | £2,000–£3,250 |
| Single garage (18 m²), EPDM rubber | £1,550–£2,750 |
| Extension (20 m²), EPDM, new deck + insulation | £2,750–£4,800 |
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
What's included?
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Vapour control layer and warm-roof or tapered insulation as specified
- Edge protection on every job and walkway protection around plant
- Hot-air welded seams, each probed along its full length
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Kettering · 7 mi
- Market Harborough · 10 mi
- Wellingborough · 13 mi
- Stamford · 14 mi
- Rushden · 15 mi
- Wigston · 18 mi
Single-ply membrane roofing in Corby: questions
Do you cover Corby?
Yes. Corby is part of our Northamptonshire coverage, including postcode districts NN17, NN18. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Corby?
Where the work needs approval it goes to North Northamptonshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Corby?
£12,950–£21,350 for a 100 m² commercial roof in single-ply with insulation, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can single-ply roofing be laid over an existing roof?
Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.
Is single-ply roofing noisy in the rain?
No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.