Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Kirkby in Ashfield

We install single-ply membrane roofs in Kirkby in Ashfield on shops, offices, units, surgeries, clubs and blocks, as well as some domestic garages and extensions. A free survey comes first, then a fixed written quote setting out the membrane, the fixing method and the insulation. The work is carried out by vetted roofing teams working under S&K.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Kirkby in Ashfield at a glance

Postcode districts
NG17
Population
about 27,539 (GeoNames)
Council area
Ashfield District Council
Building approval
Ashfield District Council building control, or a registered building control approver
Nearest main town
Mansfield, about 3 miles
Guide price region
East Midlands (−2% on West Midlands rates)

Why choose single-ply roofing in Kirkby in Ashfield?

Single-ply often suits blocks and mixed-use buildings in Kirkby in Ashfield because no flame is used on the roof, which can make work around residents and businesses easier to plan. Hot-air welding still needs care, but the fire risk is lower than with torch-on.

In and around Kirkby in Ashfield, flat roofs are typically found on lock-up garage blocks on estates, and on 1930s semis with flat-roofed garages and kitchen extensions. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.

How much does a single-ply roof cost in Kirkby in Ashfield?

For Kirkby in Ashfield we use East Midlands rates: £12,950–£21,350 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,950–£21,350
Single garage (18 m²), single-ply£2,000–£3,250
Single garage (18 m²), EPDM rubber£1,550–£2,750
Extension (20 m²), EPDM, new deck + insulation£2,750–£4,800

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Hot-air welded seams, each probed along its full length
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Edge protection on every job and walkway protection around plant
  • Vapour control layer and warm-roof or tapered insulation as specified

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Kirkby in Ashfield: questions

Do you cover Kirkby in Ashfield?

Yes. Kirkby in Ashfield is part of our Nottinghamshire coverage, including postcode districts NG17. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Kirkby in Ashfield?

Where the work needs approval it goes to Ashfield District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Kirkby in Ashfield?

£12,950–£21,350 for a 100 m² commercial roof in single-ply with insulation, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Can single-ply be used on a house?

Yes. It can be used on garages, extensions and dormers, usually adhered rather than mechanically fixed. On small domestic roofs, though, EPDM or GRP is often more economical.

Other flat roof work in Kirkby in Ashfield

Single-ply membrane roofing in Kirkby in Ashfield: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price