Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Renfrew

We install single-ply membrane roofs in Renfrew on shops, offices, units, surgeries, clubs and blocks, as well as some domestic garages and extensions. A free survey comes first, then a fixed written quote setting out the membrane, the fixing method and the insulation. The work is carried out by vetted roofing teams working under S&K.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Renfrew at a glance

Postcode districts
PA4
Population
about 24,270 (GeoNames)
Council area
Renfrewshire Council
Building approval
Renfrewshire Council building standards
Nearest main town
Clydebank, about 2 miles
Guide price region
Scotland (−5% on West Midlands rates)

Why choose single-ply roofing in Renfrew?

For a commercial roof in Renfrew with rooflights, plant and outlets, single-ply's welded details give a consistent finish. Pre-formed corners, membrane-coated trims and welded kerbs are all made in the same material as the main roof, which keeps the roof consistent and simplifies any future repairs.

In a town like Renfrew, flat roofs are commonly found on lock-up garage blocks on estates or low-rise post-war blocks of flats. Scotland averages roughly 1,570 mm of rain a year, with the west far wetter than the east, so drainage, falls and wind uplift are part of every specification we write.

How much does a single-ply roof cost in Renfrew?

Guide price in Renfrew: £12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, including VAT at Scotland rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Single garage (18 m²), single-ply£1,950–£3,150
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • Vapour control layer and warm-roof or tapered insulation as specified
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Edge protection on every job and walkway protection around plant

Building standards in Scotland

In Scotland the building standards technical handbooks (Section 6 for energy) apply, and the council's building standards service decides whether a building warrant is needed. Like-for-like repairs to a roof covering can be exempt; alterations, structural work and new roofs usually need a warrant before work starts. The domestic roof benchmark is 0.12 W/m²K, applied as far as reasonably practicable on an existing roof. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Renfrew: questions

Do you cover Renfrew?

Yes. Renfrew is part of our Renfrewshire coverage, including postcode districts PA4. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building standards for a flat roof in Renfrew?

Where the work needs approval it goes to Renfrewshire Council building standards. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Renfrew?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Scotland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can single-ply roofing be laid over an existing roof?

Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.

How long does a commercial single-ply roof take?

A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.

Other flat roof work in Renfrew

Single-ply membrane roofing in Renfrew: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price