Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Weston-super-Mare

Planning a single-ply roof in Weston-super-Mare? Use the guide-price tool for a starting figure, then book a free survey. We measure up, check the deck, falls, rooflights and plant, and return a fixed written price. Every re-roof carries our written workmanship guarantee, with manufacturer guarantees registered where the system allows.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Weston-super-Mare at a glance

Postcode districts
BS22, BS23
Population
about 82,903 (GeoNames)
Council area
North Somerset Council
Building approval
North Somerset Council building control, or a registered building control approver
Nearest main town
Bristol, about 18 miles
Guide price region
South West (+3% on West Midlands rates)

Why choose single-ply roofing in Weston-super-Mare?

If a flat roof in Weston-super-Mare has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.

Around Weston-super-Mare, flat roofs are common on bungalows with flat-roofed side extensions and dormers and on shops with flat-roofed rear stores below flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.

How much does a single-ply roof cost in Weston-super-Mare?

At South West guide rates, a 100 m² commercial roof in single-ply with insulation comes to £13,650–£22,450 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,650–£22,450
Single garage (18 m²), single-ply£2,100–£3,450
Single garage (18 m²), EPDM rubber£1,650–£2,900
Extension (20 m²), EPDM, new deck + insulation£2,900–£5,050

Should a single-ply roof be mechanically fixed or adhered, and how are the seams welded?

Most commercial single-ply roofs are mechanically fixed, while adhered systems suit decks that cannot take fixings or roofs where a smooth finish is wanted. The choice depends on the deck, the wind exposure of the site and the manufacturer's specification.

MethodHow it worksTypical use
Mechanically fixedFasteners and plates hold the membrane through the insulation into the deck, hidden under the lap of the next sheetMetal, timber and concrete decks on commercial roofs
AdheredMembrane bonded to the insulation or deck with adhesiveDomestic roofs, roofs where fixings are unsuitable
BallastedLoose-laid and held down by paving, gravel or a green roofInverted roofs, terraces, green roofs

Fixing patterns are worked out for the site, with more fasteners at corners and perimeters, where wind uplift is strongest.

Seams are welded by hot-air machines and hand tools that melt the overlapping edges so they fuse. Each seam is then probed along its length to find any gaps, and test welds are made at the start of the day to set the machine for the weather. On commercial jobs we also check that walkways protect the membrane around plant.

What's included?

  • Strip-out or preparation of the existing roof, with waste removed
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • Hot-air welded seams, each probed along its full length

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Weston-super-Mare: questions

Do you cover Weston-super-Mare?

Yes. Weston-super-Mare is part of our Somerset coverage, including postcode districts BS22, BS23. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Weston-super-Mare?

Where the work needs approval it goes to North Somerset Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Weston-super-Mare?

£13,650–£22,450 for a 100 m² commercial roof in single-ply with insulation, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can a single-ply roof be repaired?

Yes. A compatible patch is cleaned and hot-air welded over the damage. Older membranes may need extra cleaning before they weld properly, which the team checks on site.

Can single-ply roofing be laid over an existing roof?

Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.

Other flat roof work in Weston-super-Mare

Single-ply membrane roofing in Weston-super-Mare: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price