Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Lichfield

If you manage or own a commercial building in Lichfield, single-ply is often the most practical way to replace a large flat roof. We phase the work so the building stays weathertight, protect occupied areas, and add insulation and tapered falls where the roof needs them. Guide prices are online.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Lichfield at a glance

Postcode districts
WS13
Population
about 34,738 (GeoNames)
Council area
Lichfield District Council
Building approval
Lichfield District Council building control, or a registered building control approver
Nearest main town
Tamworth, about 6 miles
Guide price region
West Midlands (baseline rates)

Why choose single-ply roofing in Lichfield?

If a flat roof in Lichfield has poor falls and ponding, a single-ply re-roof with tapered insulation can correct both problems at once. The tapered boards build the fall into the insulation, and the membrane is laid over the top, with outlets set at the new low points.

Lichfield's flat roofs are mostly on lock-up garage blocks on estates, with plenty on shops with flat-roofed rear stores below flats too. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.

How much does a single-ply roof cost in Lichfield?

Guide price in Lichfield: £13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, including VAT at West Midlands rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,250–£21,800
Single garage (18 m²), single-ply£2,050–£3,350
Single garage (18 m²), EPDM rubber£1,600–£2,800
Extension (20 m²), EPDM, new deck + insulation£2,800–£4,900

Is single-ply the right system for my roof?

Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.

In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.

Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.

For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.

What's included?

  • Vapour control layer and warm-roof or tapered insulation as specified
  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • Edge protection on every job and walkway protection around plant
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Lichfield: questions

Do you cover Lichfield?

Yes. Lichfield is part of our Staffordshire coverage, including postcode districts WS13. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Lichfield?

Where the work needs approval it goes to Lichfield District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Lichfield?

£13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Does single-ply work with solar panels or a green roof?

Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.

Other flat roof work in Lichfield

Single-ply membrane roofing in Lichfield: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price