Flat RoofingContractors

Flat roof systems

Single-ply membrane roofing in Newmarket

For landlords and businesses across Suffolk, including Newmarket, we strip and re-roof in single-ply membrane, welding and probing every seam. Upstands, outlets and rooflight kerbs are formed in the same material, and the fixing pattern is worked out for the roof's exposure to wind.

Light grey single-ply membrane roof with welded seams, outlets and plant on a commercial buildingComputer-generated example image

Newmarket at a glance

Postcode districts
CB8
Population
about 20,384 (GeoNames)
Council area
West Suffolk Council
Building approval
West Suffolk Council building control, or a registered building control approver
Nearest main town
Cambridge, about 13 miles
Guide price region
East of England (+5% on West Midlands rates)

Why choose single-ply roofing in Newmarket?

Single-ply also works on an extension or garage in Newmarket if you want a light, clean finish in a pale colour. On small roofs it is usually adhered, and while it can cost more than EPDM, it gives the same welded seams and details found on commercial roofs.

In a town like Newmarket, flat roofs are commonly found on 1960s and 1970s link-detached houses with flat-roofed garages and porches or bungalows with flat-roofed side extensions and dormers. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof.

How much does a single-ply roof cost in Newmarket?

For Newmarket we use East of England rates: £13,900–£22,850 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,900–£22,850
Single garage (18 m²), single-ply£2,150–£3,500
Single garage (18 m²), EPDM rubber£1,700–£2,950
Extension (20 m²), EPDM, new deck + insulation£2,950–£5,150

Is single-ply the right system for my roof?

Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.

In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.

Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.

For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.

What's included?

  • Edge protection on every job and walkway protection around plant
  • PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
  • Welded details at upstands, outlets, rooflight kerbs and edge trims
  • Strip-out or preparation of the existing roof, with waste removed

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Single-ply membrane roofing in Newmarket: questions

Do you cover Newmarket?

Yes. Newmarket is part of our Suffolk coverage, including postcode districts CB8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Newmarket?

Where the work needs approval it goes to West Suffolk Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a single-ply roof cost in Newmarket?

£13,900–£22,850 for a 100 m² commercial roof in single-ply with insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is single-ply roofing noisy in the rain?

No more than other flat roofs. Noise depends far more on the deck and insulation than on the membrane, and an insulated warm roof dampens rain noise well.

Can single-ply roofing be laid over an existing roof?

Sometimes, if the existing roof and deck are dry and sound, often with a separation layer or new insulation on top. Wet insulation or a damaged deck means stripping first.

Other flat roof work in Newmarket

Single-ply membrane roofing in Newmarket: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price