Shirley at a glance
- Postcode districts
- B90
- Population
- about 32,000 (GeoNames)
- Council area
- Solihull Council
- Building approval
- Solihull Council building control, or a registered building control approver
- Nearest main town
- Solihull, about 2 miles
- Guide price region
- West Midlands (baseline rates)
Why choose single-ply roofing in Shirley?
Single-ply often suits blocks and mixed-use buildings in Shirley because no flame is used on the roof, which can make work around residents and businesses easier to plan. Hot-air welding still needs care, but the fire risk is lower than with torch-on.
In and around Shirley, flat roofs are typically found on newer estates where the first extension roofs are now being replaced, and on shops with flat-roofed rear stores below flats. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.
How much does a single-ply roof cost in Shirley?
At West Midlands guide rates, a 100 m² commercial roof in single-ply with insulation comes to £13,250–£21,800 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,250–£21,800 |
| Single garage (18 m²), single-ply | £2,050–£3,350 |
| Single garage (18 m²), EPDM rubber | £1,600–£2,800 |
| Extension (20 m²), EPDM, new deck + insulation | £2,800–£4,900 |
Is single-ply the right system for my roof?
Single-ply is usually the right system for medium and large flat roofs, such as shops, offices, units, surgeries, clubs and blocks, where speed of installation, light weight and long life matter. On a small domestic roof it can work well, though it is not always the most economical choice.
In its favour: lightweight; quick to lay over large areas; flame-free, as the seams are welded with hot air; long typical life; welded details at rooflights and plant; lighter-coloured membranes reflect more sunlight.
Against it: only one waterproof layer, so welding quality is critical; can be punctured by foot traffic or dropped tools without walkway protection; PVC needs separating from bitumen; repairs need compatible material and welding equipment.
For a small garage or extension, EPDM is often simpler. Where people walk regularly, GRP or a liquid system may be tougher. A multi-layer torch-on felt roof gives built-in redundancy, and on older buildings mastic asphalt may be the original material. Our commercial flat roofing page covers larger jobs.
What's included?
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- Edge protection on every job and walkway protection around plant
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
- Hot-air welded seams, each probed along its full length
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Solihull · 2 mi
- Acocks Green · 3 mi
- Birmingham · 6 mi
- Washwood Heath · 6 mi
- Bartley Green · 8 mi
- Smethwick · 8 mi
Single-ply membrane roofing in Shirley: questions
Do you cover Shirley?
Yes. Shirley is part of our West Midlands coverage, including postcode districts B90. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Shirley?
Where the work needs approval it goes to Solihull Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Shirley?
£13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
What is the difference between PVC and TPO roofing?
Both are thermoplastic single-ply membranes welded with hot air. PVC contains plasticisers and usually needs separating from bitumen, while TPO and FPO are polyolefin-based; the right one depends on the roof and the system specified.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.