Pudsey at a glance
- Postcode districts
- LS28
- Population
- about 25,393 (GeoNames)
- Council area
- Leeds City Council
- Building approval
- Leeds City Council building control, or a registered building control approver
- Nearest main town
- Bradford, about 4 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
Why choose single-ply roofing in Pudsey?
Single-ply is a common choice for medium and large flat roofs in Pudsey because it covers big areas quickly, is light on the structure and has a long typical life. Wide rolls mean fewer seams, and those seams are welded and probed rather than glued.
In and around Pudsey, flat roofs are typically found on 1960s and 1970s link-detached houses with flat-roofed garages and porches, and on 1930s semis with flat-roofed garages and kitchen extensions. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a single-ply roof cost in Pudsey?
For Pudsey we use Yorkshire and the Humber rates: £12,550–£20,700 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £12,550–£20,700 |
| Single garage (18 m²), single-ply | £1,950–£3,150 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
What insulation and approvals does a single-ply re-roof need?
On a heated building, a full single-ply re-roof usually triggers the thermal-element rules, so insulation should be brought towards the renovation standard where feasible. In England that is 0.18 W/m²K for non-domestic and 0.16 W/m²K for domestic roofs, with Wales and Northern Ireland setting their own figures; Scottish roofs follow Section 6 of the building standards, and the council confirms whether a building warrant is required.
Single-ply suits a warm roof well, and tapered insulation can correct poor falls at the same time. A thicker build-up raises the roof, so we check upstand heights, door thresholds and rooflight kerbs at survey. Near boundaries, the external fire classification of the tested build-up can matter. We handle building control or building standards where needed; see the building regulations page.
What's included?
- Edge protection on every job and walkway protection around plant
- Strip-out or preparation of the existing roof, with waste removed
- Welded details at upstands, outlets, rooflight kerbs and edge trims
- PVC, TPO or FPO membrane, mechanically fixed, adhered or ballasted
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Single-ply membrane roofing in Pudsey: questions
Do you cover Pudsey?
Yes. Pudsey is part of our West Yorkshire coverage, including postcode districts LS28. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Pudsey?
Where the work needs approval it goes to Leeds City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a single-ply roof cost in Pudsey?
£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Does single-ply work with solar panels or a green roof?
Usually, yes. Many systems can be specified for sedum or ballasted green roofs, and solar mounts can be welded or ballasted, though the structure and wind loads must be checked first.
How long does a commercial single-ply roof take?
A roof of around 100 m² typically takes several days, depending on strip-out, insulation, details and weather. Work is phased so the building stays weathertight and occupied areas are protected.