Bodmin at a glance
- Postcode districts
- PL31
- Population
- about 16,909 (GeoNames)
- Council area
- Cornwall Council
- Building approval
- Cornwall Council building control, or a registered building control approver
- Guide price region
- South West (+3% on West Midlands rates)
Why choose torch-on felt roofing in Bodmin?
Torch-on felt is widely specified for blocks of flats and HMOs, in Bodmin as elsewhere, because the system is well understood, widely repairable and governed by a British Standard code of practice. Three-layer builds with insulation are common on larger, multi-occupied roofs.
Bodmin's flat roofs are mostly on low-rise post-war blocks of flats, with plenty on newer estates where the first extension roofs are now being replaced too. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a torch-on felt roof cost in Bodmin?
At South West guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,550–£2,700 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,550–£2,700 |
| Extension (20 m²), felt, new deck + insulation | £2,800–£4,850 |
| Block of flats (150 m²), felt + insulation + scaffold | £16,000–£28,000 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), EPDM, new deck + insulation | £2,900–£5,050 |
Is torch-on roofing safe, and what is the difference between two- and three-layer systems?
Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:
- check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
- use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
- keep fire extinguishers on the roof and the gas bottles secured and away from the work;
- stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.
As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.
Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.
What's included?
- Hot-works checks and fire watch on every torch-on job
- Strip-off of the existing roof covering and removal of waste
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Mineral-finished cap sheet, upstands, outlets and edge trims
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Bodmin: questions
Do you cover Bodmin?
Yes. Bodmin is part of our Cornwall coverage, including postcode districts PL31. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Bodmin?
Where the work needs approval it goes to Cornwall Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Bodmin?
£1,550–£2,700 for a typical 18 m² garage roof in torch-on felt, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can torch-on felt go over an existing felt roof?
Sometimes, if the old roof is dry, well bonded and the deck is sound. Often stripping is better, because overlaying can trap moisture and hide rot; our guide to overlay or strip explains how we decide.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.