Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Portadown

If your flat roof in Portadown is showing worn chippings, blisters or split laps, a new torch-on roof may be the answer. Book a free survey and we will tell you honestly whether a repair will do, or whether stripping and re-covering in reinforced bitumen membrane is the better long-term option.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Portadown at a glance

Postcode districts
BT62, BT63
Population
about 32,926 (GeoNames)
Council area
Armagh City, Banbridge and Craigavon Borough Council
Building approval
Armagh City, Banbridge and Craigavon Borough Council building control
Nearest main town
Craigavon, about 3 miles
Guide price region
Northern Ireland (−12% on West Midlands rates)

Why choose torch-on felt roofing in Portadown?

Torch-on felt suits property owners in Portadown who want a dependable, layered roof without paying the top price per square metre. With two or three bonded layers, a single small defect in one sheet need not lead to a leak, which is a real advantage on larger roofs that are hard to inspect often.

Portadown's flat roofs are mostly on 1960s and 1970s link-detached houses with flat-roofed garages and porches, with plenty on low-rise post-war blocks of flats too. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.

How much does a torch-on felt roof cost in Portadown?

At Northern Ireland guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,350–£2,300 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,350–£2,300
Extension (20 m²), felt, new deck + insulation£2,400–£4,100
Block of flats (150 m²), felt + insulation + scaffold£13,700–£23,950
Single garage (18 m²), EPDM rubber£1,400–£2,450
Extension (20 m²), EPDM, new deck + insulation£2,450–£4,300

Is torch-on roofing safe, and what is the difference between two- and three-layer systems?

Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:

  • check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
  • use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
  • keep fire extinguishers on the roof and the gas bottles secured and away from the work;
  • stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.

As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.

Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.

What's included?

  • Hot-works checks and fire watch on every torch-on job
  • Mineral-finished cap sheet, upstands, outlets and edge trims
  • Vapour control layer and warm-roof insulation where needed
  • Deck inspection with replacement of damaged boards

Building control in Northern Ireland

In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Portadown: questions

Do you cover Portadown?

Yes. Portadown is part of our County Armagh coverage, including postcode districts BT62, BT63. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Portadown?

Where the work needs approval it goes to Armagh City, Banbridge and Craigavon Borough Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Portadown?

£1,350–£2,300 for a typical 18 m² garage roof in torch-on felt, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is torch-on felt better than the old felt roofs?

Yes, considerably. Modern torch-on membranes are polymer-modified and polyester-reinforced, laid in bonded layers, and typically last much longer than the older felt systems they replace.

Is torch-on suitable for a block of flats?

Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.

Other flat roof work in Portadown

Torch-on felt roofing in Portadown: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price