Plymstock at a glance
- Postcode districts
- PL9
- Population
- about 24,103 (GeoNames)
- Council area
- Plymouth City Council
- Building approval
- Plymouth City Council building control, or a registered building control approver
- Nearest main town
- Plymouth, about 2 miles
- Guide price region
- South West (+3% on West Midlands rates)
Why choose torch-on felt roofing in Plymstock?
For a commercial roof in Plymstock, such as a shop, surgery or club, torch-on felt offers a hard-wearing mineral finish that takes occasional maintenance traffic. Phased work keeps part of the building weathertight while the rest is re-roofed, so the business can usually keep trading.
In a town like Plymstock, flat roofs are commonly found on shops with flat-roofed rear stores below flats or 1930s semis with flat-roofed garages and kitchen extensions. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a torch-on felt roof cost in Plymstock?
Guide price in Plymstock: £1,550–£2,700 for a typical 18 m² garage roof in torch-on felt, including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,550–£2,700 |
| Extension (20 m²), felt, new deck + insulation | £2,800–£4,850 |
| Block of flats (150 m²), felt + insulation + scaffold | £16,000–£28,000 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), EPDM, new deck + insulation | £2,900–£5,050 |
Should I choose torch-on felt or a different flat roof system?
Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.
For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.
Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.
On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.
What's included?
- Vapour control layer and warm-roof insulation where needed
- Deck inspection with replacement of damaged boards
- Hot-works checks and fire watch on every torch-on job
- Mineral-finished cap sheet, upstands, outlets and edge trims
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Plymstock: questions
Do you cover Plymstock?
Yes. Plymstock is part of our Devon coverage, including postcode districts PL9. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Plymstock?
Where the work needs approval it goes to Plymouth City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Plymstock?
£1,550–£2,700 for a typical 18 m² garage roof in torch-on felt, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can I paint or coat an old felt roof?
Reflective or liquid coatings can extend the life of a sound felt roof, but they will not fix wet insulation, a rotten deck or poor falls. A survey shows whether coating or replacement makes more sense.
Is torch-on suitable for a block of flats?
Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.