Yate at a glance
- Postcode districts
- BS37
- Population
- about 23,703 (GeoNames)
- Council area
- South Gloucestershire Council
- Building approval
- South Gloucestershire Council building control, or a registered building control approver
- Nearest main town
- Bristol, about 10 miles
- Guide price region
- South West (+3% on West Midlands rates)
Why choose torch-on felt roofing in Yate?
Torch-on felt is widely specified for blocks of flats and HMOs, in Yate as elsewhere, because the system is well understood, widely repairable and governed by a British Standard code of practice. Three-layer builds with insulation are common on larger, multi-occupied roofs.
In a town like Yate, flat roofs are commonly found on lock-up garage blocks on estates or low-rise post-war blocks of flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a torch-on felt roof cost in Yate?
Guide price in Yate: £1,550–£2,700 for a typical 18 m² garage roof in torch-on felt, including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,550–£2,700 |
| Extension (20 m²), felt, new deck + insulation | £2,800–£4,850 |
| Block of flats (150 m²), felt + insulation + scaffold | £16,000–£28,000 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), EPDM, new deck + insulation | £2,900–£5,050 |
Does replacing a felt roof mean upgrading the insulation?
Usually, yes, when the roof is over a heated space and more than half of it is being re-covered. In England, Wales and Northern Ireland that is renovation of a thermal element, which should be brought towards the renovation U-value where feasible; a Scottish project goes through the council's building standards service, which confirms whether a warrant applies.
A felt replacement is a good point to switch to a warm roof, with insulation laid above the deck under the new membranes. On larger roofs, tapered insulation can also correct poor falls that have caused ponding, which a patch repair cannot fix. Raising the roof level affects upstands and door thresholds, so we check heights at survey. Any approval is arranged by us as part of the job, and the building regulations page sets out the rules by nation.
What's included?
- Deck inspection with replacement of damaged boards
- Vapour control layer and warm-roof insulation where needed
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Mineral-finished cap sheet, upstands, outlets and edge trims
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Yate: questions
Do you cover Yate?
Yes. Yate is part of our Gloucestershire coverage, including postcode districts BS37. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Yate?
Where the work needs approval it goes to South Gloucestershire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Yate?
£1,550–£2,700 for a typical 18 m² garage roof in torch-on felt, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.
Why does my felt roof have blisters?
Blisters usually form when moisture or air trapped beneath the felt expands in the sun. A few small, intact blisters may be monitored, but widespread or split blisters point to a repair or replacement.