Salford at a glance
- Postcode districts
- M3, M5, M6, M7, M27, M28, M30
- Population
- about 129,794 (GeoNames)
- Council area
- Salford City Council
- Building approval
- Salford City Council building control, or a registered building control approver
- Nearest main town
- Manchester, about 2 miles
- Guide price region
- North West (−5% on West Midlands rates)
Why choose torch-on felt roofing in Salford?
On larger roofs in Salford with poor falls, torch-on felt pairs well with tapered insulation, which builds the fall into the insulation boards. That deals with ponding properly while adding insulation, rather than patching the low spots and waiting for the next leak.
Salford's flat roofs are mostly on 1930s semis with flat-roofed garages and kitchen extensions, with plenty on 1960s and 1970s link-detached houses with flat-roofed garages and porches too. The North West is one of England's wetter regions, averaging roughly 1,290 mm of rain a year, so falls, outlets and well-detailed upstands matter more than the membrane colour.
How much does a torch-on felt roof cost in Salford?
For Salford we use North West rates: £1,450–£2,500 is the guide for a typical 18 m² garage roof in torch-on felt, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,450–£2,500 |
| Extension (20 m²), felt, new deck + insulation | £2,550–£4,450 |
| Block of flats (150 m²), felt + insulation + scaffold | £14,750–£25,850 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
Does replacing a felt roof mean upgrading the insulation?
Usually, yes, when the roof is over a heated space and more than half of it is being re-covered. In England, Wales and Northern Ireland that is renovation of a thermal element, which should be brought towards the renovation U-value where feasible; a Scottish project goes through the council's building standards service, which confirms whether a warrant applies.
A felt replacement is a good point to switch to a warm roof, with insulation laid above the deck under the new membranes. On larger roofs, tapered insulation can also correct poor falls that have caused ponding, which a patch repair cannot fix. Raising the roof level affects upstands and door thresholds, so we check heights at survey. Any approval is arranged by us as part of the job, and the building regulations page sets out the rules by nation.
What's included?
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Hot-works checks and fire watch on every torch-on job
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Deck inspection with replacement of damaged boards
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Salford: questions
Do you cover Salford?
Yes. Salford is part of our Greater Manchester coverage, including postcode districts M3, M5, M6, M7, M27, M28 and 1 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Salford?
Where the work needs approval it goes to Salford City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Salford?
£1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, at North West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Is torch-on suitable for a block of flats?
Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.
Why does my felt roof have blisters?
Blisters usually form when moisture or air trapped beneath the felt expands in the sun. A few small, intact blisters may be monitored, but widespread or split blisters point to a repair or replacement.