Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Gainsborough

Across Lincolnshire, including Gainsborough, we use torch-on felt on roofs where a proven, multi-layer system makes sense. The surveyor checks the deck, the falls and any timber near the edges before recommending two or three layers, and every detail is set out in your fixed written quote.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Gainsborough at a glance

Postcode districts
DN21
Population
about 20,537 (GeoNames)
Council area
West Lindsey District Council
Building approval
West Lindsey District Council building control, or a registered building control approver
Nearest main town
Scunthorpe, about 14 miles
Guide price region
East Midlands (−2% on West Midlands rates)

Why choose torch-on felt roofing in Gainsborough?

Torch-on felt is widely specified for blocks of flats and HMOs, in Gainsborough as elsewhere, because the system is well understood, widely repairable and governed by a British Standard code of practice. Three-layer builds with insulation are common on larger, multi-occupied roofs.

Around Gainsborough, flat roofs are common on terraced streets with flat-roofed rear kitchens and bathrooms and on newer estates where the first extension roofs are now being replaced. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.

How much does a torch-on felt roof cost in Gainsborough?

Guide price in Gainsborough: £1,500–£2,550 for a typical 18 m² garage roof in torch-on felt, including VAT at East Midlands rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,500–£2,550
Extension (20 m²), felt, new deck + insulation£2,650–£4,600
Block of flats (150 m²), felt + insulation + scaffold£15,250–£26,650
Single garage (18 m²), EPDM rubber£1,550–£2,750
Extension (20 m²), EPDM, new deck + insulation£2,750–£4,800

Does replacing a felt roof mean upgrading the insulation?

Usually, yes, when the roof is over a heated space and more than half of it is being re-covered. In England, Wales and Northern Ireland that is renovation of a thermal element, which should be brought towards the renovation U-value where feasible; a Scottish project goes through the council's building standards service, which confirms whether a warrant applies.

A felt replacement is a good point to switch to a warm roof, with insulation laid above the deck under the new membranes. On larger roofs, tapered insulation can also correct poor falls that have caused ponding, which a patch repair cannot fix. Raising the roof level affects upstands and door thresholds, so we check heights at survey. Any approval is arranged by us as part of the job, and the building regulations page sets out the rules by nation.

What's included?

  • Mineral-finished cap sheet, upstands, outlets and edge trims
  • Deck inspection with replacement of damaged boards
  • Two- or three-layer reinforced bitumen membrane with staggered laps
  • Hot-works checks and fire watch on every torch-on job

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Gainsborough: questions

Do you cover Gainsborough?

Yes. Gainsborough is part of our Lincolnshire coverage, including postcode districts DN21. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Gainsborough?

Where the work needs approval it goes to West Lindsey District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Gainsborough?

£1,500–£2,550 for a typical 18 m² garage roof in torch-on felt, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is torch-on suitable for a block of flats?

Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.

Is torch-on felt better than the old felt roofs?

Yes, considerably. Modern torch-on membranes are polymer-modified and polyester-reinforced, laid in bonded layers, and typically last much longer than the older felt systems they replace.

Other flat roof work in Gainsborough

Torch-on felt roofing in Gainsborough: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price