Corby at a glance
- Postcode districts
- NN17, NN18
- Population
- about 68,164 (GeoNames)
- Council area
- North Northamptonshire Council
- Building approval
- North Northamptonshire Council building control, or a registered building control approver
- Nearest main town
- Northampton, about 19 miles
- Guide price region
- East Midlands (−2% on West Midlands rates)
Why choose torch-on felt roofing in Corby?
Torch-on is a good fit in Corby when the budget matters but quality cannot slip. Modern polyester-reinforced membranes typically last 15 to 25 years, high-performance systems longer, and manufacturer material guarantees are available on many specified systems, registered where the system allows.
Around Corby, flat roofs are common on 1960s and 1970s link-detached houses with flat-roofed garages and porches and on shops with flat-roofed rear stores below flats. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.
How much does a torch-on felt roof cost in Corby?
At East Midlands guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,500–£2,550 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,500–£2,550 |
| Extension (20 m²), felt, new deck + insulation | £2,650–£4,600 |
| Block of flats (150 m²), felt + insulation + scaffold | £15,250–£26,650 |
| Single garage (18 m²), EPDM rubber | £1,550–£2,750 |
| Extension (20 m²), EPDM, new deck + insulation | £2,750–£4,800 |
Is torch-on roofing safe, and what is the difference between two- and three-layer systems?
Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:
- check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
- use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
- keep fire extinguishers on the roof and the gas bottles secured and away from the work;
- stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.
As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.
Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.
What's included?
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Deck inspection with replacement of damaged boards
- Hot-works checks and fire watch on every torch-on job
- Vapour control layer and warm-roof insulation where needed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Kettering · 7 mi
- Market Harborough · 10 mi
- Wellingborough · 13 mi
- Stamford · 14 mi
- Rushden · 15 mi
- Wigston · 18 mi
Torch-on felt roofing in Corby: questions
Do you cover Corby?
Yes. Corby is part of our Northamptonshire coverage, including postcode districts NN17, NN18. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Corby?
Where the work needs approval it goes to North Northamptonshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Corby?
£1,500–£2,550 for a typical 18 m² garage roof in torch-on felt, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.
How long does it take to lay a torch-on felt roof?
A garage roof typically takes one to two days and an insulated extension two to three. Larger roofs and blocks are phased over longer, with each area made weathertight before the team leaves.