Bedlington at a glance
- Postcode districts
- NE22
- Population
- about 18,470 (GeoNames)
- Council area
- Northumberland County Council
- Building approval
- Northumberland County Council building control, or a registered building control approver
- Nearest main town
- Blyth, about 3 miles
- Guide price region
- North East (−7% on West Midlands rates)
Why choose torch-on felt roofing in Bedlington?
Torch-on felt is widely specified for blocks of flats and HMOs, in Bedlington as elsewhere, because the system is well understood, widely repairable and governed by a British Standard code of practice. Three-layer builds with insulation are common on larger, multi-occupied roofs.
In a town like Bedlington, flat roofs are commonly found on terraced streets with flat-roofed rear kitchens and bathrooms or 1960s and 1970s link-detached houses with flat-roofed garages and porches. England averages roughly 870 mm of rain a year; the North East is drier than the west but cold and windy near the coast, so wind uplift and freeze-thaw are in the specification.
How much does a torch-on felt roof cost in Bedlington?
At North East guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,400–£2,450 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,400–£2,450 |
| Extension (20 m²), felt, new deck + insulation | £2,500–£4,350 |
| Block of flats (150 m²), felt + insulation + scaffold | £14,450–£25,300 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,550 |
Should I choose torch-on felt or a different flat roof system?
Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.
For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.
Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.
On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.
What's included?
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Deck inspection with replacement of damaged boards
- Vapour control layer and warm-roof insulation where needed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Bedlington: questions
Do you cover Bedlington?
Yes. Bedlington is part of our Northumberland coverage, including postcode districts NE22. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Bedlington?
Where the work needs approval it goes to Northumberland County Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Bedlington?
£1,400–£2,450 for a typical 18 m² garage roof in torch-on felt, at North East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
How long does it take to lay a torch-on felt roof?
A garage roof typically takes one to two days and an insulated extension two to three. Larger roofs and blocks are phased over longer, with each area made weathertight before the team leaves.
Is torch-on suitable for a block of flats?
Yes, layered bitumen systems are widely used on blocks of flats and commercial buildings. Larger roofs often use three layers and insulation, with hot works planned around residents.