Eastwood at a glance
- Postcode districts
- NG16
- Population
- about 18,612 (GeoNames)
- Council area
- Broxtowe Borough Council
- Building approval
- Broxtowe Borough Council building control, or a registered building control approver
- Nearest main town
- Nottingham, about 7 miles
- Guide price region
- East Midlands (−2% on West Midlands rates)
Why choose torch-on felt roofing in Eastwood?
Torch-on felt is widely specified for blocks of flats and HMOs, in Eastwood as elsewhere, because the system is well understood, widely repairable and governed by a British Standard code of practice. Three-layer builds with insulation are common on larger, multi-occupied roofs.
Around Eastwood, flat roofs are common on lock-up garage blocks on estates and on low-rise post-war blocks of flats. The East Midlands is drier than the west of Britain, so most flat roofs here fail through age, UV and poor detailing at upstands rather than sheer rainfall.
How much does a torch-on felt roof cost in Eastwood?
At East Midlands guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,500–£2,550 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,500–£2,550 |
| Extension (20 m²), felt, new deck + insulation | £2,650–£4,600 |
| Block of flats (150 m²), felt + insulation + scaffold | £15,250–£26,650 |
| Single garage (18 m²), EPDM rubber | £1,550–£2,750 |
| Extension (20 m²), EPDM, new deck + insulation | £2,750–£4,800 |
Should I choose torch-on felt or a different flat roof system?
Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.
For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.
Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.
On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.
What's included?
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Strip-off of the existing roof covering and removal of waste
- Deck inspection with replacement of damaged boards
- Vapour control layer and warm-roof insulation where needed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Torch-on felt roofing in Eastwood: questions
Do you cover Eastwood?
Yes. Eastwood is part of our Nottinghamshire coverage, including postcode districts NG16. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Eastwood?
Where the work needs approval it goes to Broxtowe Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Eastwood?
£1,500–£2,550 for a typical 18 m² garage roof in torch-on felt, at East Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Why does my felt roof have blisters?
Blisters usually form when moisture or air trapped beneath the felt expands in the sun. A few small, intact blisters may be monitored, but widespread or split blisters point to a repair or replacement.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.