Torch-on felt roofing across Oxfordshire

Price per m²

£66–£116

Typical life

15–25 years

Manufacturer guarantees

10–20 year material guarantees on specified systems

Typical garage roof

£1,650–£2,900

How much does a torch-on felt roof cost in Oxfordshire?

Guide prices including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

Which flat roofs are common in Oxfordshire?

Flat roofs in Oxfordshire sit on newer estates where the first extension roofs are now being replaced, 1960s and 1970s link-detached houses with flat-roofed garages and porches and lock-up garage blocks on estates. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Oxfordshire the application goes to Oxford City Council, Cherwell District Council, Vale of White Horse District Council and 2 other councils. More on the rules.

Should I choose torch-on felt or a different flat roof system?

Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.

For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.

Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.

On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.

Is torch-on roofing safe, and what is the difference between two- and three-layer systems?

Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:

• check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
• use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
• keep fire extinguishers on the roof and the gas bottles secured and away from the work;
• stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.

As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.

Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.

Which towns in Oxfordshire do we cover?

• Oxford
• Banbury
• Abingdon
• Bicester
• Didcot
• Witney
• Cowley
• Carterton

Everything about torch-on felt roofing → · All flat roofing in Oxfordshire →