Hirwaun at a glance
- Postcode districts
- CF44
- Population
- about 7,247 (GeoNames)
- Council area
- Rhondda Cynon Taf County Borough Council
- Building approval
- Rhondda Cynon Taf County Borough Council building control, or a registered building control approver
- Nearest main town
- Merthyr Tydfil, about 6 miles
- Guide price region
- Wales (−8% on West Midlands rates)
Why choose torch-on felt roofing in Hirwaun?
Torch-on felt suits property owners in Hirwaun who want a dependable, layered roof without paying the top price per square metre. With two or three bonded layers, a single small defect in one sheet need not lead to a leak, which is a real advantage on larger roofs that are hard to inspect often.
In a town like Hirwaun, flat roofs are commonly found on low-rise post-war blocks of flats or 1960s and 1970s link-detached houses with flat-roofed garages and porches. Wales averages roughly 1,460 mm of rain a year, among the wettest in Britain, so we design for steady run-off: proper falls, clear outlets and upstands well above the finished roof.
How much does a torch-on felt roof cost in Hirwaun?
For Hirwaun we use Wales rates: £1,400–£2,400 is the guide for a typical 18 m² garage roof in torch-on felt, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,400–£2,400 |
| Extension (20 m²), felt, new deck + insulation | £2,500–£4,300 |
| Block of flats (150 m²), felt + insulation + scaffold | £14,300–£25,000 |
| Single garage (18 m²), EPDM rubber | £1,450–£2,600 |
| Extension (20 m²), EPDM, new deck + insulation | £2,600–£4,500 |
Is torch-on roofing safe, and what is the difference between two- and three-layer systems?
Yes, torch-on is safe when hot works are properly controlled, because most roof fires linked to torching start at hidden timber or debris near edges and upstands, not on the open roof. Our teams follow a hot-works routine on every job:
- check eaves, fascias, soffits and wall cavities for timber, nests and debris before lighting a torch;
- use a cold-applied or self-adhesive membrane, rather than a flame, at edges, against combustible materials and in tight details;
- keep fire extinguishers on the roof and the gas bottles secured and away from the work;
- stop torching well before the team leaves, then carry out a fire watch so smouldering is spotted while people are still on site.
As for layers, a two-layer system (underlay plus cap sheet) is common on domestic roofs such as garages and extensions. A three-layer system adds an intermediate sheet, giving more thickness and redundancy, and is often specified on larger, commercial and multi-occupied roofs. The right choice depends on the size and use of the roof and the system's requirements, so we set it out in the quote.
Near a boundary, the external fire performance of the tested build-up, such as a BROOF(t4) classification, can also matter, and we check it where it applies.
What's included?
- Mineral-finished cap sheet, upstands, outlets and edge trims
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Strip-off of the existing roof covering and removal of waste
- Hot-works checks and fire watch on every torch-on job
Building regulations in Wales
The Welsh Approved Document L applies. Renovating more than half of a roof over a heated room means upgrading it to around 0.16 W/m²K where feasible, and new extension roofs are built to 0.13 W/m²K. Welsh Government guidance is that most re-roofing needs building control approval, so check whenever more than a quarter of a roof is replaced or repaired. We deal with the application as part of the job. More on the rules.
Which nearby areas do we also cover?
- Aberdare · 3 mi
- Treorchy · 6 mi
- Merthyr Tydfil · 6 mi
- Rhondda · 6 mi
- Mountain Ash · 7 mi
- Tonypandy · 8 mi
Torch-on felt roofing in Hirwaun: questions
Do you cover Hirwaun?
Yes. Hirwaun is part of our Rhondda Cynon Taf coverage, including postcode districts CF44. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Hirwaun?
Where the work needs approval it goes to Rhondda Cynon Taf County Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Hirwaun?
£1,400–£2,400 for a typical 18 m² garage roof in torch-on felt, at Wales guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can I paint or coat an old felt roof?
Reflective or liquid coatings can extend the life of a sound felt roof, but they will not fix wet insulation, a rotten deck or poor falls. A survey shows whether coating or replacement makes more sense.
Can torch-on felt be laid in wet weather?
Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.