Wellington at a glance
- Postcode districts
- TF1, TF5
- Population
- about 22,816 (GeoNames)
- Council area
- Telford & Wrekin Council
- Building approval
- Telford & Wrekin Council building control, or a registered building control approver
- Nearest main town
- Telford, about 3 miles
- Guide price region
- West Midlands (baseline rates)
Why choose torch-on felt roofing in Wellington?
On larger roofs in Wellington with poor falls, torch-on felt pairs well with tapered insulation, which builds the fall into the insulation boards. That deals with ponding properly while adding insulation, rather than patching the low spots and waiting for the next leak.
In and around Wellington, flat roofs are typically found on lock-up garage blocks on estates, and on 1960s and 1970s link-detached houses with flat-roofed garages and porches. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.
How much does a torch-on felt roof cost in Wellington?
For Wellington we use West Midlands rates: £1,500–£2,600 is the guide for a typical 18 m² garage roof in torch-on felt, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Single garage (18 m²), torch-on felt | £1,500–£2,600 |
| Extension (20 m²), felt, new deck + insulation | £2,700–£4,700 |
| Block of flats (150 m²), felt + insulation + scaffold | £15,550–£27,200 |
| Single garage (18 m²), EPDM rubber | £1,600–£2,800 |
| Extension (20 m²), EPDM, new deck + insulation | £2,800–£4,900 |
Should I choose torch-on felt or a different flat roof system?
Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.
For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.
Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.
On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.
What's included?
- Strip-off of the existing roof covering and removal of waste
- Vapour control layer and warm-roof insulation where needed
- Two- or three-layer reinforced bitumen membrane with staggered laps
- Deck inspection with replacement of damaged boards
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Telford · 3 mi
- Shrewsbury · 10 mi
- Stafford · 18 mi
- Wolverhampton · 18 mi
- Kingswinford · 20 mi
- Cannock · 20 mi
Torch-on felt roofing in Wellington: questions
Do you cover Wellington?
Yes. Wellington is part of our Shropshire coverage, including postcode districts TF1, TF5. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Wellington?
Where the work needs approval it goes to Telford & Wrekin Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a torch-on felt roof cost in Wellington?
£1,500–£2,600 for a typical 18 m² garage roof in torch-on felt, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
How long does it take to lay a torch-on felt roof?
A garage roof typically takes one to two days and an insulated extension two to three. Larger roofs and blocks are phased over longer, with each area made weathertight before the team leaves.
Why does my felt roof have blisters?
Blisters usually form when moisture or air trapped beneath the felt expands in the sun. A few small, intact blisters may be monitored, but widespread or split blisters point to a repair or replacement.