Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Brierley Hill

Across West Midlands, including Brierley Hill, we use torch-on felt on roofs where a proven, multi-layer system makes sense. The surveyor checks the deck, the falls and any timber near the edges before recommending two or three layers, and every detail is set out in your fixed written quote.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Brierley Hill at a glance

Postcode districts
DY5
Population
about 28,000 (GeoNames)
Council area
Dudley Council
Building approval
Dudley Council building control, or a registered building control approver
Nearest main town
Dudley, about 2 miles
Guide price region
West Midlands (baseline rates)

Why choose torch-on felt roofing in Brierley Hill?

Torch-on felt suits property owners in Brierley Hill who want a dependable, layered roof without paying the top price per square metre. With two or three bonded layers, a single small defect in one sheet need not lead to a leak, which is a real advantage on larger roofs that are hard to inspect often.

In a town like Brierley Hill, flat roofs are commonly found on lock-up garage blocks on estates or low-rise post-war blocks of flats. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds.

How much does a torch-on felt roof cost in Brierley Hill?

For Brierley Hill we use West Midlands rates: £1,500–£2,600 is the guide for a typical 18 m² garage roof in torch-on felt, VAT included. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,500–£2,600
Extension (20 m²), felt, new deck + insulation£2,700–£4,700
Block of flats (150 m²), felt + insulation + scaffold£15,550–£27,200
Single garage (18 m²), EPDM rubber£1,600–£2,800
Extension (20 m²), EPDM, new deck + insulation£2,800–£4,900

How long does a torch-on felt roof last, and what is the guarantee?

A modern torch-on roof typically lasts 15 to 25 years, and high-performance systems with better membranes can last longer. That is a big step up from older felt roofs, which were often single-layer, unreinforced or poorly bonded.

What shortens the life of a felt roof is usually visible: mineral chippings worn away so the bitumen is exposed to sunlight, blisters where moisture was trapped, split laps, and upstands that have slumped or pulled away from the wall. Ponding speeds all of this up.

Manufacturer material guarantees are available on many specified torch-on systems; they often depend on a particular build-up and registration, which we handle where the system allows. Every re-roof also comes with our written workmanship guarantee, the length of which is stated in the quote, and insurance-backed options can be discussed. Our flat roof lifespan guide compares felt with the other systems.

What's included?

  • Two- or three-layer reinforced bitumen membrane with staggered laps
  • Mineral-finished cap sheet, upstands, outlets and edge trims
  • Deck inspection with replacement of damaged boards
  • Hot-works checks and fire watch on every torch-on job

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Brierley Hill: questions

Do you cover Brierley Hill?

Yes. Brierley Hill is part of our West Midlands coverage, including postcode districts DY5. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Brierley Hill?

Where the work needs approval it goes to Dudley Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Brierley Hill?

£1,500–£2,600 for a typical 18 m² garage roof in torch-on felt, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Is torch-on felt better than the old felt roofs?

Yes, considerably. Modern torch-on membranes are polymer-modified and polyester-reinforced, laid in bonded layers, and typically last much longer than the older felt systems they replace.

How long does it take to lay a torch-on felt roof?

A garage roof typically takes one to two days and an insulated extension two to three. Larger roofs and blocks are phased over longer, with each area made weathertight before the team leaves.

Other flat roof work in Brierley Hill

Torch-on felt roofing in Brierley Hill: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price