Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Brighouse

If your flat roof in Brighouse is showing worn chippings, blisters or split laps, a new torch-on roof may be the answer. Book a free survey and we will tell you honestly whether a repair will do, or whether stripping and re-covering in reinforced bitumen membrane is the better long-term option.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Brighouse at a glance

Postcode districts
HD6
Population
about 32,872 (GeoNames)
Council area
Calderdale Council
Building approval
Calderdale Council building control, or a registered building control approver
Nearest main town
Halifax, about 3 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

Why choose torch-on felt roofing in Brighouse?

Torch-on felt suits property owners in Brighouse who want a dependable, layered roof without paying the top price per square metre. With two or three bonded layers, a single small defect in one sheet need not lead to a leak, which is a real advantage on larger roofs that are hard to inspect often.

Around Brighouse, flat roofs are common on 1960s and 1970s link-detached houses with flat-roofed garages and porches and on newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a torch-on felt roof cost in Brighouse?

Guide price in Brighouse: £1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, including VAT at Yorkshire and the Humber rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,450–£2,500
Extension (20 m²), felt, new deck + insulation£2,550–£4,450
Block of flats (150 m²), felt + insulation + scaffold£14,750–£25,850
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Should I choose torch-on felt or a different flat roof system?

Choose torch-on felt when you want a proven, layered system at a sensible price, particularly on larger roofs, blocks of flats and commercial buildings where several layers give useful redundancy. It is a weaker choice where hot works are hard to manage safely.

For: generally lower cost per square metre; two or three layers, so a single defect in one layer need not cause a leak; tough mineral finish; long track record and a British Standard code of practice; repairs can be made with compatible materials.

Against: needs a naked flame unless a cold-applied or self-adhesive alternative is used; shorter typical life than EPDM or GRP; the finish is functional rather than decorative; more laps to detail than a single sheet.

On small domestic roofs near timber, EPDM avoids the torch entirely. GRP gives a harder, neater surface. For an overlay, a liquid-applied system is often simpler. Large commercial roofs may suit single-ply, and older buildings may suit mastic asphalt. See our comparison guide.

What's included?

  • Deck inspection with replacement of damaged boards
  • Two- or three-layer reinforced bitumen membrane with staggered laps
  • Vapour control layer and warm-roof insulation where needed
  • Hot-works checks and fire watch on every torch-on job

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Brighouse: questions

Do you cover Brighouse?

Yes. Brighouse is part of our West Yorkshire coverage, including postcode districts HD6. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Brighouse?

Where the work needs approval it goes to Calderdale Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Brighouse?

£1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can I paint or coat an old felt roof?

Reflective or liquid coatings can extend the life of a sound felt roof, but they will not fix wet insulation, a rotten deck or poor falls. A survey shows whether coating or replacement makes more sense.

Can torch-on felt be laid in wet weather?

Not in rain or on a wet deck, because moisture trapped under the membrane causes blisters. Light cold weather is usually workable, but we will postpone rather than lay on a damp surface.

Other flat roof work in Brighouse

Torch-on felt roofing in Brighouse: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price