Selby at a glance
- Postcode districts
- YO8
- Population
- about 24,859 (GeoNames)
- Council area
- North Yorkshire Council
- Building approval
- North Yorkshire Council building control, or a registered building control approver
- Nearest main town
- York, about 12 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
Why upgrade to a warm roof in Selby?
Landlords with flats and HMOs in Selby sometimes hear from tenants about cold top-floor rooms and black mould on ceilings. A warm roof upgrade during re-roofing tackles both the heat loss and the condensation behind the mould, and helps keep the roof timbers dry.
In and around Selby, flat roofs are typically found on 1960s and 1970s link-detached houses with flat-roofed garages and porches, and on newer estates where the first extension roofs are now being replaced. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a warm roof upgrade cost in Selby?
For Selby we use Yorkshire and the Humber rates: £2,650–£4,650 is the guide for a 20 m² extension roof in EPDM with a new deck and insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
| Extension (20 m²), EPDM with sedum green roof | £4,200–£7,700 |
How long does a warm roof last?
The insulation in a warm roof should last for the life of the waterproofing above it, as long as it stays dry. Rigid PIR boards don't settle or slump in the way some loose insulation can.
The waterproofing is what sets the timescale. EPDM is typically quoted at 25 to 50 years, GRP at 20 to 40 years and modern torch-on felt at 15 to 25 years with good specification and care. A warm build-up also helps the deck, because keeping it warm and dry lowers the risk of condensation rot. If the waterproofing fails and water gets into the insulation, the wet boards should be replaced, so leaks need prompt attention. The lifespan guide compares the systems.
What's included?
- Upstands, trims and kerbs reset to the new roof level
- Survey of the deck, joists and existing insulation
- Vapour control layer on the warm side of the insulation
- New waterproofing, with a written workmanship guarantee
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
Warm roof insulation upgrades in Selby: questions
Do you cover Selby?
Yes. Selby is part of our North Yorkshire coverage, including postcode districts YO8. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Selby?
Where the work needs approval it goes to North Yorkshire Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a warm roof upgrade cost in Selby?
£2,650–£4,650 for a 20 m² extension roof in EPDM with a new deck and insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you insulate a flat roof from inside instead?
It is possible, but insulating between or under the joists creates a cold roof, which needs ventilation and carries a higher condensation risk. When the roof is being re-covered anyway, a warm roof from above is usually the better option.
How thick does flat roof insulation need to be?
It depends on the insulation product and the U-value target. With common PIR boards, meeting a renovation target usually means well over 100 mm. Thinner, higher-performance boards are available where height is tight.