Bradford at a glance
- Postcode districts
- BD1, BD2, BD3, BD4, BD5, BD6, BD7, BD8 and 9 more
- Population
- about 366,187 (GeoNames)
- Council area
- City of Bradford Metropolitan District Council
- Building approval
- City of Bradford Metropolitan District Council building control, or a registered building control approver
- Nearest main town
- Leeds, about 8 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
What flat roof work do we do in Bradford?
Torch-on felt roofing
Where a flat roof in Bradford already has a felt covering and the building owner wants like-for-like, torch-on is the natural replacement. The old roof is stripped, the deck checked and the new layers laid, often with warm-roof insulation added when the space below is heated.
Emergency leak repairs
Leaves and debris build up in outlets and gutters on flat roofs around Bradford, especially under trees. A blocked outlet can turn a normal rainstorm into a flood over the upstands. Clearing it is often part of the emergency visit, and the permanent fix looks at why it blocked.
GRP fibreglass roofing
GRP is a good choice in Bradford when the roof will be seen or used: a dormer visible from the street, an extension overlooked by upstairs windows, or a roof that needs access for cleaning or maintenance. The hard, jointless finish and moulded trims give a neat result that copes with occasional foot traffic.
All flat roof services in Bradford:
- Extension and kitchen roofs
- Flat roof repairs
- EPDM rubber roofing
- Flat roof replacement
- Dormer roofs
- Torch-on felt roofing
- Green and sedum roofs
- Single-ply membrane roofing
- Flats, HMOs and block roofs
- Garage roofs
- Emergency leak repairs
- GRP fibreglass roofing
- Flat roof surveys and leak tracing
- Commercial flat roofing
- Warm roof insulation upgrades
- Balconies and roof terraces
- Liquid-applied roofing
How much does a flat roof cost in Bradford?
Guide prices at Yorkshire and the Humber rates including VAT. New and replacement roofs get a fixed price after a free survey; repair prices are confirmed once we've found the problem.
| Job | Guide price inc VAT |
|---|---|
| Condition survey and leak investigation | £140–£290 |
| Extension (20 m²), EPDM, new deck + insulation | £2,650–£4,650 |
| Dormer (8 m²), GRP, scaffold | £1,350–£2,500 |
| Single garage (18 m²), GRP fibreglass | £1,700–£3,100 |
| Extension (20 m²), EPDM, insulation + 1 rooflight upstand | £2,850–£4,950 |
What flat roofs are typical in and around Bradford?
In a city like Bradford flat roofs are mostly on terraced streets with flat-roofed rear kitchens and bathrooms and 1960s and 1970s link-detached houses with flat-roofed garages and porches. The climate is part of the brief. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county. Approximate 1991–2020 regional averages based on Met Office data.
Who approves flat roof work in Bradford?
Where approval is needed it goes to City of Bradford Metropolitan District Council building control, or a registered building control approver. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. How the rules work.
Which places near Bradford do we cover?
Flat roofing in Bradford: questions
Do you cover Bradford?
Yes, including postcode districts BD1, BD2, BD3, BD4, BD5, BD6 and 11 more. Send your postcode with your enquiry and we'll arrange a survey.
Do flat roofs in Bradford need building control approval?
Often. Replacing more than half of a roof over a heated room usually means insulating it to current standards and notifying building control, and structural changes need approval too. In Bradford that's City of Bradford Metropolitan District Council building control, or a registered building control approver. We tell you at the survey and handle it.
What's the best flat roof system for a house in Bradford?
For most garages and extensions it's EPDM or GRP; torch-on felt is the budget option and liquid suits detailed or overlay jobs. We recommend one at the survey.
Do you also cover Shipley?
Yes. Shipley is about 3 miles from Bradford and we cover it too.
