Flat RoofingContractors

Flat roof systems

Torch-on felt roofing in Bradford

If your flat roof in Bradford is showing worn chippings, blisters or split laps, a new torch-on roof may be the answer. Book a free survey and we will tell you honestly whether a repair will do, or whether stripping and re-covering in reinforced bitumen membrane is the better long-term option.

Roofer torching a slate-grey mineral cap sheet on a commercial flat roof behind edge protectionComputer-generated example image

Bradford at a glance

Postcode districts
BD1, BD2, BD3, BD4, BD5, BD6, BD7, BD8 and 9 more
Population
about 366,187 (GeoNames)
Council area
City of Bradford Metropolitan District Council
Building approval
City of Bradford Metropolitan District Council building control, or a registered building control approver
Nearest main town
Leeds, about 8 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

Why choose torch-on felt roofing in Bradford?

On larger roofs in Bradford with poor falls, torch-on felt pairs well with tapered insulation, which builds the fall into the insulation boards. That deals with ponding properly while adding insulation, rather than patching the low spots and waiting for the next leak.

Around Bradford, flat roofs are common on bungalows with flat-roofed side extensions and dormers and on 1960s and 1970s link-detached houses with flat-roofed garages and porches. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a torch-on felt roof cost in Bradford?

At Yorkshire and the Humber guide rates, a typical 18 m² garage roof in torch-on felt comes to £1,450–£2,500 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Single garage (18 m²), torch-on felt£1,450–£2,500
Extension (20 m²), felt, new deck + insulation£2,550–£4,450
Block of flats (150 m²), felt + insulation + scaffold£14,750–£25,850
Single garage (18 m²), EPDM rubber£1,500–£2,650
Extension (20 m²), EPDM, new deck + insulation£2,650–£4,650

Does replacing a felt roof mean upgrading the insulation?

Usually, yes, when the roof is over a heated space and more than half of it is being re-covered. In England, Wales and Northern Ireland that is renovation of a thermal element, which should be brought towards the renovation U-value where feasible; a Scottish project goes through the council's building standards service, which confirms whether a warrant applies.

A felt replacement is a good point to switch to a warm roof, with insulation laid above the deck under the new membranes. On larger roofs, tapered insulation can also correct poor falls that have caused ponding, which a patch repair cannot fix. Raising the roof level affects upstands and door thresholds, so we check heights at survey. Any approval is arranged by us as part of the job, and the building regulations page sets out the rules by nation.

What's included?

  • Strip-off of the existing roof covering and removal of waste
  • Vapour control layer and warm-roof insulation where needed
  • Hot-works checks and fire watch on every torch-on job
  • Mineral-finished cap sheet, upstands, outlets and edge trims

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Torch-on felt roofing in Bradford: questions

Do you cover Bradford?

Yes. Bradford is part of our West Yorkshire coverage, including postcode districts BD1, BD2, BD3, BD4, BD5, BD6 and 11 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Bradford?

Where the work needs approval it goes to City of Bradford Metropolitan District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a torch-on felt roof cost in Bradford?

£1,450–£2,500 for a typical 18 m² garage roof in torch-on felt, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Why does my felt roof have blisters?

Blisters usually form when moisture or air trapped beneath the felt expands in the sun. A few small, intact blisters may be monitored, but widespread or split blisters point to a repair or replacement.

Can I paint or coat an old felt roof?

Reflective or liquid coatings can extend the life of a sound felt roof, but they will not fix wet insulation, a rotten deck or poor falls. A survey shows whether coating or replacement makes more sense.

Other flat roof work in Bradford

Torch-on felt roofing in Bradford: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price