Flat RoofingContractors

Commercial and blocks

Commercial flat roofing across Bedfordshire

We carry out commercial flat roofing across Bedfordshire for shops, offices, trade and light industrial units, clubs and surgeries. Every replacement starts with a free survey and a fixed written quote, and the programme is planned around trading hours, deliveries and site rules. Systems include single-ply, built-up felt, liquid-applied overlays and mastic asphalt, with insulation upgraded where building regulations require it.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image
Guide price
£13,900–£22,850
Survey
Free for new and replacement roofs
Quote
Fixed, in writing
Coverage
England, Wales, Scotland, NI

Bedfordshire at a glance

Largest towns
Luton, Bedford, Dunstable, Leighton Buzzard
Postcode areas
LU, MK, SG
Building control
Luton Borough Council, Bedford Borough Council and Central Bedfordshire Council
Neighbouring areas
Hertfordshire · Buckinghamshire · Northamptonshire · Cambridgeshire
Guide price region
East of England (+5% on West Midlands rates)

How much does a commercial flat roof cost in Bedfordshire?

Guide prices including VAT at East of England rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£13,900–£22,850
Condition survey and leak investigation£160–£320
Block of flats (150 m²), felt + insulation + scaffold£16,350–£28,550

Which flat roofs are common in Bedfordshire?

Flat roofs in Bedfordshire sit on terraced streets with flat-roofed rear kitchens and bathrooms, 1930s semis with flat-roofed garages and kitchen extensions and lock-up garage blocks on estates. The East of England is the driest part of Britain, with parts of the Anglian region around 630 mm a year, so summer heat and UV, not rainfall, do most of the ageing on a felt roof. Approximate 1991–2020 regional averages based on Met Office data.

Building regulations in England

Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Bedfordshire the application goes to Luton Borough Council, Bedford Borough Council and Central Bedfordshire Council. More on the rules.

How do you handle CDM, roof access and fragile surfaces?

Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.

As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.

Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.

Do you offer condition surveys and phased budgets?

Yes. A condition survey with a written report is a paid service, guide £160–£320 for a typical single roof, with larger or multi-roof sites priced before we attend. A survey and quote for replacement work is free.

The report covers the covering, upstands, outlets, edges and rooflights, signs of ponding or wet insulation, and what needs doing now, soon and later. You can then plan a phased programme: urgent repairs first, then re-roofing in sections over one or more budget years, with each phase priced separately in your written quote.

Re-covering more than half of a roof over heated space usually triggers the thermal element rules, so the insulation is upgraded towards the renovation U-value where feasible; in England the non-domestic target is 0.18 W/m²K. We handle building control where it is needed. See building regulations and flat roof surveys.

Which towns in Bedfordshire do we cover?

Commercial flat roofing in Bedfordshire: questions

Which towns in Bedfordshire do you cover?

All of Bedfordshire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.

How much does a commercial flat roof cost in Bedfordshire?

£13,900–£22,850 for a 100 m² commercial roof in single-ply with insulation, at East of England guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Which postcode areas do you cover in Bedfordshire?

All of Bedfordshire, including the LU, MK, SG postcode areas. Send your full postcode and we'll confirm.

Can the cost be spread over more than one budget year?

Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.

Who deals with building control on a commercial re-roof?

We do, where the work needs approval. Replacing more than half of a roof over heated space usually means upgrading the insulation towards the renovation U-value where feasible, which is 0.18 W/m²K for non-domestic buildings in England.

Can you re-roof while our premises stay open?

Usually, yes. We phase the work so each section is watertight before the team leaves site, keep entrances and fire exits clear, and agree working hours and deliveries with you first.

Everything about commercial flat roofing → · All flat roofing in Bedfordshire →

Get a fixed price for your flat roof

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price