Lisburn at a glance
- Postcode districts
- BT17, BT26, BT27, BT28
- Population
- about 77,506 (GeoNames)
- Council area
- Lisburn and Castlereagh City Council
- Building approval
- Lisburn and Castlereagh City Council building control
- Nearest main town
- Belfast, about 7 miles
- Guide price region
- Northern Ireland (−12% on West Midlands rates)
What do commercial flat roofs in Lisburn need?
Owners and agents in Lisburn can plan spending with a phased programme: urgent repairs now, then re-roofing section by section over one or more budget years. Each phase is priced separately in writing, and the survey and quote for replacement work are free, with no obligation to go ahead.
In and around Lisburn, flat roofs are typically found on 1960s and 1970s link-detached houses with flat-roofed garages and porches, and on newer estates where the first extension roofs are now being replaced. Northern Ireland averages roughly 1,150 mm of rain a year, spread over many wet days, so a roof that sheds water quickly to clear outlets lasts far longer than one that holds puddles.
How much does a commercial flat roof cost in Lisburn?
For Lisburn we use Northern Ireland rates: £11,650–£19,150 is the guide for a 100 m² commercial roof in single-ply with insulation, VAT included. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £11,650–£19,150 |
| Condition survey and leak investigation | £130–£260 |
| Block of flats (150 m²), felt + insulation + scaffold | £13,700–£23,950 |
Do you offer condition surveys and phased budgets?
Yes. A condition survey with a written report is a paid service, guide £130–£260 for a typical single roof, with larger or multi-roof sites priced before we attend. A survey and quote for replacement work is free.
The report covers the covering, upstands, outlets, edges and rooflights, signs of ponding or wet insulation, and what needs doing now, soon and later. You can then plan a phased programme: urgent repairs first, then re-roofing in sections over one or more budget years, with each phase priced separately in your written quote.
Re-covering more than half of a roof over heated space usually triggers the thermal element rules, so the insulation is upgraded towards the renovation U-value where feasible; in England the non-domestic target is 0.18 W/m²K. We handle building control where it is needed. See building regulations and flat roof surveys.
What's included?
- Warm-roof insulation upgrades and building control where needed
- CDM planning, edge protection and fragile-surface controls on every job
- Single-ply, built-up felt, liquid-applied and mastic asphalt systems
- Programme planned around trading hours, deliveries and site rules
Building control in Northern Ireland
In Northern Ireland, Technical Booklet F1 sets roof insulation at 0.18 W/m²K when a roof over a heated room is renovated or newly built, where that's feasible. The district council's building control should be contacted before work starts, and we prepare the details it asks for. More on the rules.
Which nearby areas do we also cover?
Commercial flat roofing in Lisburn: questions
Do you cover Lisburn?
Yes. Lisburn is part of our County Antrim coverage, including postcode districts BT17, BT26, BT27, BT28. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Lisburn?
Where the work needs approval it goes to Lisburn and Castlereagh City Council building control. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a commercial flat roof cost in Lisburn?
£11,650–£19,150 for a 100 m² commercial roof in single-ply with insulation, at Northern Ireland guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can the cost be spread over more than one budget year?
Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.
Do you need a hot works permit?
Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.