Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Andover

For facilities managers and business owners in Andover, we handle planned re-roofing and reactive leak repairs on flat roofs. Expect a clear method statement, edge protection on every job, and a written quote that shows each phase separately if you want to spread the cost over more than one budget year.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Andover at a glance

Postcode districts
SP10
Population
about 42,276 (GeoNames)
Council area
Test Valley Borough Council
Building approval
Test Valley Borough Council building control, or a registered building control approver
Nearest main town
Basingstoke, about 18 miles
Guide price region
South East (+10% on West Midlands rates)

What do commercial flat roofs in Andover need?

Safety planning matters on commercial sites in Andover. Every job is planned under CDM, with a method statement, edge protection and covers over rooflights and fragile areas. If asbestos is found, a licensed specialist surveys and removes it before our work starts, so nobody is put at risk.

Around Andover, flat roofs are common on shops with flat-roofed rear stores below flats and on terraced streets with flat-roofed rear kitchens and bathrooms. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a commercial flat roof cost in Andover?

Guide price in Andover: £14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Condition survey and leak investigation£170–£330
Block of flats (150 m²), felt + insulation + scaffold£17,100–£29,900

How do you handle CDM, roof access and fragile surfaces?

Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.

As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.

Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.

What's included?

  • CDM planning, edge protection and fragile-surface controls on every job
  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems
  • Written workmanship guarantee, with manufacturer guarantees registered where the system allows
  • Programme planned around trading hours, deliveries and site rules

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Andover: questions

Do you cover Andover?

Yes. Andover is part of our Hampshire coverage, including postcode districts SP10. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Andover?

Where the work needs approval it goes to Test Valley Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Andover?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

What happens to air conditioning units and other roof plant?

Plant can often stay in place, with the new roof detailed around its supports. Where it has to be isolated and lifted, your mechanical contractor does that while we re-roof beneath it, and we agree the timing at survey stage.

Do you work on school roofs?

Yes, where the school or its managing body appoints its own contractor. If your procurement rules require a framework contractor, check that before asking us to quote.

Other flat roof work in Andover

Commercial flat roofing in Andover: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price