Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Bordon

Need the flat roof sorted on a shop, office or unit in Bordon? Our vetted roofing teams, working under S&K, lay single-ply, built-up felt and liquid-applied systems, and we put the system, phasing, access and price in writing before any work is booked, so you know exactly what you are paying for.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Bordon at a glance

Postcode districts
GU35
Population
about 20,978 (GeoNames)
Council area
East Hampshire District Council
Building approval
East Hampshire District Council building control, or a registered building control approver
Nearest main town
Basingstoke, about 14 miles
Guide price region
South East (+10% on West Midlands rates)

What do commercial flat roofs in Bordon need?

Businesses in Bordon need a roofing contractor who arrives with a plan, not just a price. We put the system, build-up, phasing, access and payment terms in a fixed written quote, and keep each section of the roof watertight before the team leaves site, so trading is not put at risk.

In a town like Bordon, flat roofs are commonly found on terraced streets with flat-roofed rear kitchens and bathrooms or lock-up garage blocks on estates. Much of the South East sits in the drier Thames catchment at roughly 730 mm of rain a year, so the usual failures are at joints, upstands and outlets rather than from sheer volume of rain.

How much does a commercial flat roof cost in Bordon?

Guide price in Bordon: £14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, including VAT at South East rates. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£14,550–£23,950
Condition survey and leak investigation£170–£330
Block of flats (150 m²), felt + insulation + scaffold£17,100–£29,900

Can you work around our trading hours and site rules?

Yes. Most commercial roofs can be replaced while the building stays open, and we agree the programme with you before any work starts.

That normally means set working hours, delivery and skip positions that keep entrances and fire exits clear, and phasing the roof so each section is watertight before the team leaves site. Noisy tasks such as strip-out can be timed for quieter periods, and early starts or weekend working can be arranged where your site allows. We tell you in advance which areas below the roof may be affected, so stock and equipment can be protected or moved.

Where torch-on felt is specified, the team works under your hot works permit system, with a fire watch after the torch is put away. If your site does not allow naked flames, we specify a cold-applied, self-adhesive or other flame-free system instead. Tenants, alarm companies and mechanical contractors are coordinated through one named contact.

What's included?

  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems
  • Warm-roof insulation upgrades and building control where needed
  • CDM planning, edge protection and fragile-surface controls on every job
  • Free survey and fixed written quote for replacement and new roofs

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Bordon: questions

Do you cover Bordon?

Yes. Bordon is part of our Hampshire coverage, including postcode districts GU35. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Bordon?

Where the work needs approval it goes to East Hampshire District Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Bordon?

£14,550–£23,950 for a 100 m² commercial roof in single-ply with insulation, at South East guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can the cost be spread over more than one budget year?

Yes. We can price a phased programme with each section shown separately, starting with the most urgent areas, so you can plan the spend while the building stays protected.

Who deals with building control on a commercial re-roof?

We do, where the work needs approval. Replacing more than half of a roof over heated space usually means upgrading the insulation towards the renovation U-value where feasible, which is 0.18 W/m²K for non-domestic buildings in England.

Other flat roof work in Bordon

Commercial flat roofing in Bordon: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price