Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Yeadon

We replace and repair flat roofs on commercial buildings in Yeadon, from shop parades and offices to trade units, clubs and surgeries. Every replacement starts with a free survey and a fixed written quote, and the work is planned around your opening hours, deliveries and site rules so the business can keep running.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Yeadon at a glance

Postcode districts
LS19
Population
about 37,379 (GeoNames)
Council area
Leeds City Council
Building approval
Leeds City Council building control, or a registered building control approver
Nearest main town
Bradford, about 6 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

What do commercial flat roofs in Yeadon need?

Safety planning matters on commercial sites in Yeadon. Every job is planned under CDM, with a method statement, edge protection and covers over rooflights and fragile areas. If asbestos is found, a licensed specialist surveys and removes it before our work starts, so nobody is put at risk.

Yeadon's flat roofs are mostly on bungalows with flat-roofed side extensions and dormers, with plenty on 1960s and 1970s link-detached houses with flat-roofed garages and porches too. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a commercial flat roof cost in Yeadon?

At Yorkshire and the Humber guide rates, a 100 m² commercial roof in single-ply with insulation comes to £12,550–£20,700 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Condition survey and leak investigation£140–£290
Block of flats (150 m²), felt + insulation + scaffold£14,750–£25,850

Which roofing system suits a commercial flat roof?

Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.

  • Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
  • Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
  • Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.

Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).

What's included?

  • CDM planning, edge protection and fragile-surface controls on every job
  • Programme planned around trading hours, deliveries and site rules
  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems
  • Free survey and fixed written quote for replacement and new roofs

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Yeadon: questions

Do you cover Yeadon?

Yes. Yeadon is part of our West Yorkshire coverage, including postcode districts LS19. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Yeadon?

Where the work needs approval it goes to Leeds City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Yeadon?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Can our existing roof be overlaid instead of stripped?

Often, if the survey shows the existing covering is sound, dry and firmly bonded. Wet insulation, a soft deck or several old layers mean a strip-out is the better long-term answer.

Do you need a hot works permit?

Only if torch-on felt or other naked-flame work is used, in which case the team works under your permit system with a fire watch afterwards. Where hot works are not allowed, we specify a flame-free system such as a cold-applied membrane.

Other flat roof work in Yeadon

Commercial flat roofing in Yeadon: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price