Flat RoofingContractors

Commercial and blocks

Commercial flat roofing in Pudsey

Commercial flat roofs in Pudsey get the same careful approach whatever their size: a survey of the covering, upstands, outlets and access, a clear recommendation, and a fixed price. We work around trading so customers, staff and deliveries keep moving, and each section is watertight before the team leaves site.

Large grey membrane flat roof with plant and edge protection on a retail and warehouse unitComputer-generated example image

Pudsey at a glance

Postcode districts
LS28
Population
about 25,393 (GeoNames)
Council area
Leeds City Council
Building approval
Leeds City Council building control, or a registered building control approver
Nearest main town
Bradford, about 4 miles
Guide price region
Yorkshire and the Humber (−5% on West Midlands rates)

What do commercial flat roofs in Pudsey need?

A commercial re-roof in Pudsey has to fit around customers, staff and deliveries. We agree working hours, skip positions and access routes before we start, keep fire exits clear throughout, and choose a flame-free system where your site does not allow hot works near stock or occupied rooms.

In and around Pudsey, flat roofs are typically found on 1960s and 1970s link-detached houses with flat-roofed garages and porches, and on shops with flat-roofed rear stores below flats. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.

How much does a commercial flat roof cost in Pudsey?

At Yorkshire and the Humber guide rates, a 100 m² commercial roof in single-ply with insulation comes to £12,550–£20,700 including VAT. The fixed price comes after a free survey for new and replacement roofs.

JobGuide price inc VAT
Commercial roof (100 m²), single-ply + insulation£12,550–£20,700
Condition survey and leak investigation£140–£290
Block of flats (150 m²), felt + insulation + scaffold£14,750–£25,850

Which roofing system suits a commercial flat roof?

Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.

  • Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
  • Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
  • Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.

Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).

What's included?

  • Programme planned around trading hours, deliveries and site rules
  • Single-ply, built-up felt, liquid-applied and mastic asphalt systems
  • Warm-roof insulation upgrades and building control where needed
  • Written workmanship guarantee, with manufacturer guarantees registered where the system allows

Building regulations in England

Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.

Which nearby areas do we also cover?

Commercial flat roofing in Pudsey: questions

Do you cover Pudsey?

Yes. Pudsey is part of our West Yorkshire coverage, including postcode districts LS28. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.

Who checks building regulations for a flat roof in Pudsey?

Where the work needs approval it goes to Leeds City Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.

How much does a commercial flat roof cost in Pudsey?

£12,550–£20,700 for a 100 m² commercial roof in single-ply with insulation, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.

Who deals with building control on a commercial re-roof?

We do, where the work needs approval. Replacing more than half of a roof over heated space usually means upgrading the insulation towards the renovation U-value where feasible, which is 0.18 W/m²K for non-domestic buildings in England.

What happens to air conditioning units and other roof plant?

Plant can often stay in place, with the new roof detailed around its supports. Where it has to be isolated and lifted, your mechanical contractor does that while we re-roof beneath it, and we agree the timing at survey stage.

Other flat roof work in Pudsey

Commercial flat roofing in Pudsey: get a fixed price

Free survey and a written fixed quote for replacement and new roofs. No obligation.

Call usGet a guide price