- Guide price
- £13,250–£21,800
- Survey
- Free for new and replacement roofs
- Quote
- Fixed, in writing
- Coverage
- England, Wales, Scotland, NI
Worcestershire at a glance
- Largest towns
- Worcester, Redditch, Kidderminster, Great Malvern
- Postcode areas
- B, DY, WR
- Building control
- Worcester City Council, Redditch Borough Council, Wyre Forest District Council and 3 other councils
- Neighbouring areas
- West Midlands · Herefordshire · Warwickshire · Gloucestershire
- Guide price region
- West Midlands (baseline rates)
How much does a commercial flat roof cost in Worcestershire?
Guide prices including VAT at West Midlands rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Commercial roof (100 m²), single-ply + insulation | £13,250–£21,800 |
| Condition survey and leak investigation | £150–£300 |
| Block of flats (150 m²), felt + insulation + scaffold | £15,550–£27,200 |
Which flat roofs are common in Worcestershire?
Flat roofs in Worcestershire sit on 1930s semis with flat-roofed garages and kitchen extensions, bungalows with flat-roofed side extensions and dormers and 1960s and 1970s link-detached houses with flat-roofed garages and porches. England averages roughly 870 mm of rain a year and the West Midlands sits close to that, so falls and outlets are the difference between a roof that drains and one that ponds. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Worcestershire the application goes to Worcester City Council, Redditch Borough Council, Wyre Forest District Council and 3 other councils. More on the rules.
How do you handle CDM, roof access and fragile surfaces?
Every job is planned under the Construction (Design and Management) Regulations 2015, or CDM (NI) 2016 in Northern Ireland, with a construction phase plan and a method statement for the roof.
As a commercial client you have duties under CDM too, including passing on information about the building, such as drawings, details of previous roof work and the asbestos register. Buildings put up before 2000 can contain asbestos, so we ask for the register or a refurbishment survey before pricing a strip-out. If asbestos is found, a licensed specialist surveys and removes it before we start.
Roofs and rooflights are treated as fragile until a competent person confirms otherwise. Edge protection goes up on every job, rooflights and fragile sheets are covered or fenced off, and we agree safe access before work starts: scaffold, a tower, a powered access platform or a fixed access point where one is suitable.
Which roofing system suits a commercial flat roof?
Single-ply membrane usually suits large, simple roofs; built-up felt suits roofs with heavy foot traffic, plant or complex detailing; and a liquid-applied overlay suits a sound roof that needs new waterproofing without a full strip-out.
- Single-ply (PVC, TPO or FPO): light and quick to lay over large areas, with hot-air welded laps and fixing or bonding designed for the site's wind uplift. Indicative life 25–35+ years. See single-ply roofing.
- Built-up felt: two or three layers of reinforced bitumen membrane laid to BS 8217, hard-wearing around plant and maintenance routes. Modern systems last 15–25 years, high-performance systems longer. See torch-on felt roofing.
- Liquid-applied overlay: a reinforced coating that cures to one continuous layer, well suited to pipework, plant bases and awkward details. Indicative life 10–25+ years depending on the product. See liquid roofing.
Mastic asphalt suits concrete decks and walkways, and EPDM suits simpler roofs with few penetrations. An overlay only works where the existing roof is dry and firmly bonded, so we check for wet insulation before recommending one (see overlay or strip).
Which towns in Worcestershire do we cover?
Commercial flat roofing in Worcestershire: questions
Which towns in Worcestershire do you cover?
All of Worcestershire. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a commercial flat roof cost in Worcestershire?
£13,250–£21,800 for a 100 m² commercial roof in single-ply with insulation, at West Midlands guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which council handles building control for a flat roof in Worcestershire?
It depends on where the roof is: in Worcestershire that's Worcester City Council, Redditch Borough Council, Wyre Forest District Council and 3 other councils. Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. We confirm which applies at the survey.
Who deals with building control on a commercial re-roof?
We do, where the work needs approval. Replacing more than half of a roof over heated space usually means upgrading the insulation towards the renovation U-value where feasible, which is 0.18 W/m²K for non-domestic buildings in England.
Do you work on school roofs?
Yes, where the school or its managing body appoints its own contractor. If your procurement rules require a framework contractor, check that before asking us to quote.
What happens to air conditioning units and other roof plant?
Plant can often stay in place, with the new roof detailed around its supports. Where it has to be isolated and lifted, your mechanical contractor does that while we re-roof beneath it, and we agree the timing at survey stage.
Everything about commercial flat roofing → · All flat roofing in Worcestershire →