Bournemouth at a glance
- Postcode districts
- BH1, BH2, BH3, BH4, BH5, BH6, BH7, BH8 and 3 more
- Population
- about 163,600 (GeoNames)
- Council area
- BCP Council
- Building approval
- BCP Council building control, or a registered building control approver
- Guide price region
- South West (+3% on West Midlands rates)
What does a dormer roof in Bournemouth need?
Dormer roofs in Bournemouth are often replaced when the loft room below starts to show damp, particularly along the back wall or around the window head. By then the deck may be wet, so a full rebuild with new insulation is usually the better choice than patching from a ladder.
Around Bournemouth, flat roofs are common on 1930s semis with flat-roofed garages and kitchen extensions and on low-rise post-war blocks of flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage.
How much does a new dormer roof cost in Bournemouth?
At South West guide rates, an 8 m² GRP dormer roof including scaffold comes to £1,450–£2,750 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Dormer (8 m²), GRP, scaffold | £1,450–£2,750 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), GRP, new deck + insulation | £3,100–£5,550 |
Is GRP or EPDM better on a dormer roof?
GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.
EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.
We recommend the system after surveying the dormer, its edges and how it meets the main roof.
What's included?
- New membrane, drip trims and back-edge abutment under the tiles
- Strip-out of the old covering and deck repairs
- Warm-roof insulation and a vapour control layer
- Scaffold with edge protection, priced in the quote
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Christchurch · 4 mi
- Poole · 5 mi
- Ferndown · 6 mi
- Wimborne Minster · 6 mi
- New Milton · 10 mi
- Totton · 22 mi
Dormer roofs in Bournemouth: questions
Do you cover Bournemouth?
Yes. Bournemouth is part of our Dorset coverage, including postcode districts BH1, BH2, BH3, BH4, BH5, BH6 and 5 more. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Bournemouth?
Where the work needs approval it goes to BCP Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new dormer roof cost in Bournemouth?
£1,450–£2,750 for an 8 m² GRP dormer roof including scaffold, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Can you replace the lead on my dormer at the same time?
Yes, where lead forms part of the dormer abutment or cheek flashings, we include renewing it in the roof job.
Why does my dormer leak at the back where it meets the roof?
That junction is the most common leak point, usually because the upstand or flashing under the tiles has failed. A proper re-roof rebuilds it.