- Guide price
- £1,450–£2,750
- Survey
- Free for new and replacement roofs
- Quote
- Fixed, in writing
- Coverage
- England, Wales, Scotland, NI
Dorset at a glance
How much does a new dormer roof cost in Dorset?
Guide prices including VAT at South West rates. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Dormer (8 m²), GRP, scaffold | £1,450–£2,750 |
| Single garage (18 m²), EPDM rubber | £1,650–£2,900 |
| Extension (20 m²), GRP, new deck + insulation | £3,100–£5,550 |
Which flat roofs are common in Dorset?
Flat roofs in Dorset sit on terraced streets with flat-roofed rear kitchens and bathrooms, 1930s semis with flat-roofed garages and kitchen extensions and shops with flat-roofed rear stores below flats. The South West averages roughly 1,260 mm of rain a year and many roofs face wind off the Atlantic, so we specify fixings and edge details for wind uplift as well as drainage. Approximate 1991–2020 regional averages based on Met Office data.
Building regulations in England
Replacing more than half of a roof over a heated room usually counts as renovating a thermal element, so it is insulated to current standards and notified to building control. Renovated roofs over heated rooms are insulated to around 0.16 W/m²K where that's feasible, and new extension roofs are built to 0.15 W/m²K. In Dorset the application goes to BCP Council and Dorset Council. More on the rules.
Is GRP or EPDM better on a dormer roof?
GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.
EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.
We recommend the system after surveying the dormer, its edges and how it meets the main roof.
Do I need building regulations approval for a dormer roof?
Usually, yes, if you are replacing most of the roof. A dormer roof sits over a heated room, so it counts as a thermal element, and renovating more than half of it normally means upgrading the insulation where feasible.
In England the renovation target is 0.16 W/m²K for homes, approved through building control or a competent person scheme. Wales usually needs approval for most re-roofing work. Scotland works through the council's building standards and, where required, a building warrant. Northern Ireland asks you to contact district council building control before starting.
Insulating above the deck raises the roof slightly. On a dormer, that extra height has to fit under the main roof tiles at the back edge, so the build-up is planned at survey. Re-covering a dormer that looks the same afterwards does not usually need planning permission, but a listed building or conservation area may bring extra controls. More on our building regulations page.
Which towns in Dorset do we cover?
Dormer roofs in Dorset: questions
Which towns in Dorset do you cover?
All of Dorset. The main towns have their own pages below, and if yours isn't listed we still cover it: send your postcode and we'll confirm.
How much does a new dormer roof cost in Dorset?
£1,450–£2,750 for an 8 m² GRP dormer roof including scaffold, at South West guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Which postcode areas do you cover in Dorset?
All of Dorset, including the BH, DT postcode areas. Send your full postcode and we'll confirm.
Can a dormer roof be replaced without scaffold?
Rarely. A tower or full scaffold is usually needed to give a safe working platform and edge protection at that height.
How long does a GRP dormer roof last?
As an indicative range, GRP lasts 20–40 years with good specification and maintenance.
Why does my dormer leak at the back where it meets the roof?
That junction is the most common leak point, usually because the upstand or flashing under the tiles has failed. A proper re-roof rebuilds it.
Everything about dormer roofs → · All flat roofing in Dorset →