Yarm at a glance
- Postcode districts
- TS15
- Population
- about 19,184 (GeoNames)
- Council area
- Stockton-on-Tees Borough Council
- Building approval
- Stockton-on-Tees Borough Council building control, or a registered building control approver
- Nearest main town
- Stockton-on-Tees, about 5 miles
- Guide price region
- Yorkshire and the Humber (−5% on West Midlands rates)
What does a dormer roof in Yarm need?
In Yarm, as anywhere, it often makes sense to replace a dormer roof while scaffold is already up for other work, such as new windows, rendering or repairs to the main roof. Sharing the scaffold keeps costs down and means every edge of the dormer can be checked at the same time.
Yarm's flat roofs are mostly on low-rise post-war blocks of flats, with plenty on terraced streets with flat-roofed rear kitchens and bathrooms too. England averages roughly 870 mm of rain a year; the Pennine side of Yorkshire is wetter and windier than the east, so we specify for the site rather than the county.
How much does a new dormer roof cost in Yarm?
At Yorkshire and the Humber guide rates, an 8 m² GRP dormer roof including scaffold comes to £1,350–£2,500 including VAT. The fixed price comes after a free survey for new and replacement roofs.
| Job | Guide price inc VAT |
|---|---|
| Dormer (8 m²), GRP, scaffold | £1,350–£2,500 |
| Single garage (18 m²), EPDM rubber | £1,500–£2,650 |
| Extension (20 m²), GRP, new deck + insulation | £2,850–£5,100 |
Is GRP or EPDM better on a dormer roof?
GRP fibreglass is often the first choice on a dormer, because it is laid as a liquid resin over a mat and forms neat, rigid edges, corners and drip details on a small roof. It cures to a hard surface that copes with occasional foot traffic during window cleaning or maintenance.
EPDM rubber works well on a plain rectangular dormer and can usually be laid as one sheet, with no field joins. Unlike GRP, it does not depend on resin curing conditions on the day. Torch-on felt can be used, but working a torch close to timber cladding, fascias and tiles needs extra care, so a cold-applied system is often chosen instead.
We recommend the system after surveying the dormer, its edges and how it meets the main roof.
What's included?
- Strip-out of the old covering and deck repairs
- New membrane, drip trims and back-edge abutment under the tiles
- Warm-roof insulation and a vapour control layer
- Written workmanship guarantee, with building control handled where needed
Building regulations in England
Replacing more than half of a flat roof over a heated room usually counts as renovating a thermal element, so the roof is insulated to around 0.16 W/m²K where that's technically and economically feasible, and the work is notified to building control: the council or a registered building control approver, unless a registered competent person self-certifies it. A roof on a new extension is built to 0.15 W/m²K. Patch repairs, and most unheated detached garages, don't trigger the upgrade. Structural changes, or a new covering that adds 15% or more to the roof's weight, also need approval. More on the rules.
Which nearby areas do we also cover?
- Thornaby-on-Tees · 3 mi
- Stockton-on-Tees · 5 mi
- Billingham · 6 mi
- Middlesbrough · 7 mi
- Darlington · 8 mi
- Newton Aycliffe · 12 mi
Dormer roofs in Yarm: questions
Do you cover Yarm?
Yes. Yarm is part of our North Yorkshire coverage, including postcode districts TS15. Surveys and roofs are carried out by vetted roofing teams working under S&K Property Investments and Improvement Ltd.
Who checks building regulations for a flat roof in Yarm?
Where the work needs approval it goes to Stockton-on-Tees Borough Council building control, or a registered building control approver. We tell you at the survey whether your job needs it and deal with the paperwork as part of the quote.
How much does a new dormer roof cost in Yarm?
£1,350–£2,500 for an 8 m² GRP dormer roof including scaffold, at Yorkshire and the Humber guide rates including VAT. The fixed price comes after a free survey for new and replacement roofs.
Will insulating my dormer roof make it higher?
Yes, by the insulation thickness. We plan the build-up so the new roof still sits correctly under the main roof tiles at the back edge.
Why does my dormer leak at the back where it meets the roof?
That junction is the most common leak point, usually because the upstand or flashing under the tiles has failed. A proper re-roof rebuilds it.